What documentation is available for international PSP-S110 battery shipping?

UN38.3 test reports and MSDS/SDS documentation are provided as standard for all Li-ion battery shipments, covering IATA air freight compliance and customs clearance requirements. We ship via DHL, FedEx, and sea freight. For bulk sea freight orders, packing declarations are prepared to buyer specification.

PSP S110 3.6V 1200mAh Sony PSP 2000 PSP 3000 Slim Replacement Battery Wholesale OEM Factory Supplier 1

PSP S110 3.6V 1200mAh batterycharger dock kit Sony PSP 2000 PSP 3000 Slim Replacement Battery Wholesale OEM Factory Supplier 3

PSP S110 3.6V 1200mAh Sony PSP 2000 PSP 3000 Slim Replacement Battery Wholesale OEM Factory Supplier 2

Сменный аккумулятор PSP-S110 3,6 В 1200 мАч для портативной игровой консоли Sony PSP-2000 / PSP-3000 Slim.

Q: How long does a PSP-2000 or PSP-3000 run on the PSP-S110 battery?

At moderate screen brightness (level 2 to 3 of 5) with Wi-Fi off, expect approximately 4 to 5 hours of gameplay. Screen brightness is the single largest variable — maximum brightness cuts runtime by roughly 30 to 35%. Wi-Fi enabled during gameplay adds further drain. These figures apply to both the 2000 and 3000 hardware revisions as they share the same battery spec.

🔋 3.6V / 1200mAh / 4.4Wh — OEM-matched spec for PSP-2000 and PSP-3000; P/N: PSP-S110; Also available as a battery + charger dock kit
🎮 Подтвержденная совместимость: Sony PSP-2000 (2001–2010), PSP-3000 (3001–3010), PSP Slim & Lite, PSP Brite
📐 Direct drop-in fit — stock back cover closes without modification, no extended door required
🛡️ Встроенная защита печатной платы: от перезаряда, переразряда, короткого замыкания, перегрузки по току.
🏭 Прямые поставки с завода. — grade-A Li-ion cells, stocked SKU, low MOQ entry orders welcome
❌ NOT compatible with PSP-1000 Fat — that model uses the larger PSP-110 cell

Получить оптовую цену

Описание продукта

The PSP-2000 and PSP-3000 — Sony’s second and third generation PSP hardware — both use the PSP-S110 battery. When Sony redesigned the PSP chassis for the Slim series, the battery bay was significantly reduced in size compared to the original Fat model, which is why the PSP-1000 and PSP-2000/3000 batteries are not physically interchangeable. The PSP-S110 sits in a 58.4 × 35.8 × 9.7mm envelope and fits flush under the original back cover — no modification, no extended door, no aftermarket cover required.

Sony discontinued the PSP-S110 years ago. The entire supply market is now third-party. For repair shops and retro game resellers, this SKU represents a clean, simple stock item: one part number, direct swap, fits all Slim and Brite variants, stock cover closes.

Проверенные совместимые модели и номера оригинальных запчастей:

Устройство	OEM P/N	Примечания
Sony PSP-2000 (2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010)	PSP-S110	Slim & Lite
Sony PSP-3000 (3001, 3002, 3003, 3004, 3005, 3006, 3007, 3008, 3010)	PSP-S110	Brite
Sony PSP Slim & Lite (PAL)	PSP-S110	European designation
Sony PSP Brite (PAL)	PSP-S110	European designation

⚠️ PSP-1000 (“Fat”) is NOT compatible. That model uses PSP-110 — a physically larger cell (57.36 × 35.83 × 13.25mm). Also note: PSP Street (E1000) uses a built-in non-removable battery and cannot accept any external replacement pack.

Технические параметры

Параметр	Спецификация
Номер оригинальной детали производителя (P/N)	PSP-S110
Физические размеры	58.4mm (L) × 35.8mm (W) × 9.7mm (H)
Номинальное напряжение	3.6V
Напряжение полного заряда	4,2 В
Отключение при переразряде	2,75 В
Номинальная грузоподъемность	1200mAh / 4.4Wh
Химия клеток	Литий-ионный (Li-ion)
Клеточный класс	Класс А, отклонение пропускной способности ≤3%
Защитная цепь	Перезарядка / Переразрядка / Короткое замыкание / Перегрузка по току
Back Cover Modification	None required — fits under original stock cover
Рабочая температура	0°C – 45°C (зарядка); −20°C – 60°C (хранение)
Срок службы (оцененный)	≥500 циклов до достижения пропускной способности 80%
Масса	~28g
Совместимые устройства	Sony PSP-2000 (all variants) / PSP-3000 (all variants) / PSP Slim & Lite / PSP Brite
Сертификаты	CE / RoHS / UN38.3
Гарантия	12 месяцев с даты отгрузки

Нужен стабильный план поставок? Отправьте список моделей, количество и место назначения. Мы подтвердим сроки выполнения, способ доставки и необходимые документы перед оформлением заказа.

Получите ценовое предложение прямо сейчас

Особенности и преимущества

📐 True OEM Dimensions — Stock Cover Fits Without Modification

At 58.4 × 35.8 × 9.7mm, this replacement matches the PSP-S110 physical envelope precisely. Unlike extended-capacity alternatives that require a bulge back cover, this unit snaps directly into the PSP-2000 or PSP-3000 battery bay and the original cover closes cleanly. For repair shops, this eliminates the need to stock or source replacement covers alongside the battery.

🔋 1200mAh — Accurately Rated, No Inflated Claims

The PSP-S110 form factor has a hard physical limit of approximately 1200–1400mAh. Listings claiming 3600mAh or 6500mAh in this same footprint are impossible — the cell volume simply cannot hold that energy at this size. Our replacement is labeled at the real discharge capacity: 1200mAh, with ≤3% variance across production batches. Repair shops can give customers accurate runtime expectations rather than explaining why a “3600mAh” battery delivers the same runtime as the original.

🛡️ Full PCB Protection — Safe for Retro Collection Storage

PSP units in retro collections frequently sit for months between use. The built-in protection circuit handles over-discharge lockout at 2.75V — preventing cell damage during extended storage — plus over-charge cutoff, over-current protection, and short-circuit cut. Cells shipped without PCB protection are a liability for repair shops when customers report swollen batteries after storage.

🏭 One SKU, Full PSP Slim Coverage

The PSP-S110 covers every PSP-2000 variant (ten model numbers) and every PSP-3000 variant (ten model numbers), plus PAL Slim & Lite and Brite designations. A single stocked SKU covers the complete PSP Slim product family — no need to track individual regional model numbers. Small entry orders accepted; volume pricing opens at higher quantities.

📦 OEM & White-Label Packaging Available

Custom packaging with buyer brand name, barcode, and specifications is available for repair shop chains and resellers. Contact us with artwork files and target volume for a quote.

Упаковка и доставка

Сроки выполнения заказа и доставки

Товары в наличии: отправка в течение 3 дней.
Для стандартных моделей, имеющихся на складе.
Заказы на серийное производство: отгрузка в течение 7 дней.
Для стандартных моделей, соответствующих подтвержденным техническим характеристикам и требованиям к упаковке.
Индивидуальные заказы: отправка в течение 15 дней.
Для индивидуальной конфигурации ячеек, размера, проводов/разъемов, печатных плат/BMS, маркировки или упаковки.

Примечание: Окончательное время отправки зависит от общее количество, сложность модели, требования к упаковке и документы, подтверждающие соответствие требованиям к отгрузке.. Мы подтвердим предполагаемую дату отправки.ETD) после подтверждения заказа.

Доступные способы доставки:

Авиаперевозки (срочные, небольшие объемы)
Морские перевозки (экономически выгодно для насыпных грузов)
Железнодорожный/автомобильный транспорт (в зависимости от пункта назначения)
Экспресс-каналы

Соответствие требованиям и документы:

Доступные документы: UN38.3 / Паспорт безопасности материала / Протокол транспортных испытаний (при наличии)
В зависимости от выбранного способа доставки может быть организована соответствующая упаковка и маркировка картонных коробок.

Условия доставки:

Доступны условия поставки EXW / FOB / CIF / DDP

Часто задаваемые вопросы

Q1: What PSP models are compatible with the PSP-S110 battery?
A: The PSP-S110 covers all PSP-2000 variants (model numbers 2001 through 2010) and all PSP-3000 variants (3001 through 3010), including PAL-region designations Slim & Lite and Brite. It is not compatible with the PSP-1000 Fat — that model uses the larger PSP-110. It is also not compatible with the PSP Street (E1000), which has a built-in non-removable battery.

Q2: Does the PSP-S110 replacement battery require a new back cover?
A: No. The PSP-S110 replacement fits within the original battery bay dimensions (58.4 × 35.8 × 9.7mm) and the stock plastic back cover closes without modification. This is the main reason to choose a 1200mAh OEM-matched replacement over extended-capacity alternatives — those require a bulge back cover because the thicker cell exceeds the original bay depth.

Q3: How long does a PSP-2000 or PSP-3000 run on the PSP-S110 battery?
A: At moderate screen brightness (level 2–3 of 5) with Wi-Fi off, expect approximately 4–5 hours of gameplay. Screen brightness is the single largest variable — maximum brightness cuts runtime by roughly 30–35%. Wi-Fi enabled during gameplay adds further drain. These figures apply to both the 2000 and 3000 hardware revisions, as they share the same battery spec.

Q4: Does the PSP-S110 battery need calibration after installation?
A: A conditioning cycle is recommended. After installing, charge fully to 100%, then allow the PSP to run until it shuts off automatically from low battery. Repeat this 2–3 times. This helps the PSP’s battery indicator accurately map the new cell’s capacity curve. The PSP-3000 in particular is known for showing inaccurate percentage readings for the first few sessions after a battery replacement.

Q5: What is the MOQ for wholesale PSP-S110 battery orders?
A: We support low-volume entry orders for repair shops, retro gaming resellers, and distributors — no rigid high MOQ required. Tiered pricing unlocks at higher quantities. Sample orders before bulk commitment are supported. Contact us with your target volume for a current factory quote.

Q6: What documentation is available for international shipping?
A: UN38.3 test reports and MSDS/SDS documentation are provided as standard for all Li-ion battery shipments, covering IATA air freight compliance and customs clearance. We ship via DHL, FedEx, and sea freight. For bulk sea freight orders, packing declarations are prepared to buyer specification.

Ищете больше портативных игровых устройств для распространения? Ознакомьтесь с нашим ассортиментом. Оптовая продажа аккумуляторов для портативных игровых консолей Категория для оптовых поставок и заводских цен.