Сменный аккумулятор PSP-110 3,6 В 2200 мАч для портативной игровой консоли Sony PSP-1000 / PSP Fat Series.
-
🔋 3.6V / 2200mAh / 7.92Wh — upgraded capacity over OEM 1800mAh; P/N: PSP-110
-
🎮 Verified compatibility: Sony PSP-1000, PSP-1001, PSP-1004, PSP-1006, PSP-1000G1, PSP-1000G1W, PSP-1000K, PSP-1000KCW
-
📐 OEM-matched physical dimensions — fits original battery bay with stock cover, no modification
-
🛡️ Built-in PCB protection: over-charge, over-discharge, short-circuit
-
🏭 Factory direct supply — consistent grade-A Li-ion cells, stocked SKU, low MOQ entry
-
⚠️ NOT compatible with PSP-2000 / PSP-3000 Slim — those use PSP-S110 (different size)
Описание продукта
The Sony PSP-1000 — known in the community as “PSP Fat” — was the original PlayStation Portable chassis released in 2004. It remains in active use among retro gaming collectors, and its battery (OEM P/N: PSP-110) has been discontinued by Sony for years. The aftermarket is the only viable supply source for the 20+ million PSP-1000 units still in use globally.
The critical compatibility boundary here is physical size. The PSP-1000 and PSP-2000/3000 use completely different battery dimensions and cannot swap cells. PSP-1000 uses the larger PSP-110 format (57.36 × 35.83 × 13.25mm); PSP-2000/3000 Slim uses the thinner PSP-S110. Ordering the wrong one is the most common repair shop mistake with PSP batteries.
Our replacement ships at 2200 мАч — a modest, honest upgrade over the 1800mAh OEM spec that fits within the original battery bay with the stock cover intact. No aftermarket extended door required.
Verified Compatible Models & OEM Part Numbers:
| Модель устройства | OEM Battery P/N | Примечания |
|---|---|---|
| Sony PSP-1000 | PSP-110 | Original “Fat” PSP |
| Sony PSP-1001 | PSP-110 | North America variant |
| Sony PSP-1004 | PSP-110 | European variant |
| Sony PSP-1006 | PSP-110 | Asian variant |
| Sony PSP-1000G1 | PSP-110 | Japan variant |
| Sony PSP-1000G1W | PSP-110 | Japan white variant |
| Sony PSP-1000K | PSP-110 | Value pack variant |
| Sony PSP-1000KCW | PSP-110 | Ceramic white variant |
⚠️ This battery is NOT compatible with PSP-2000, PSP-3000, or PSP Slim models. Those require PSP-S110, which is physically smaller and will not function in the PSP-1000 chassis.
Технические параметры
| Параметр | Спецификация |
|---|---|
| OEM Part Number (P/N) | PSP-110 |
| Physical Dimensions | 57.36mm (L) × 35.83mm (W) × 13.25mm (H) |
| Номинальное напряжение | 3.6V |
| Fully Charged Voltage | 4.2V |
| Over-Discharge Cutoff | 2,75 В |
| Номинальная грузоподъемность | 2200mAh / 7.92Wh |
| OEM Capacity (reference) | 1800mAh / 6.66Wh |
| Химия клеток | Lithium-Ion (Li-ion) |
| Клеточный класс | Grade A, ≤3% capacity variance |
| Защитная цепь | Over-charge / Over-discharge / Short-circuit |
| Рабочая температура | 0°C – 45°C (charging); −20°C – 60°C (storage) |
| Cycle Life (rated) | ≥500 cycles to 80% capacity |
| Масса | ~45g |
| Совместимые устройства | Sony PSP-1000 / 1001 / 1004 / 1006 / 1000G1 / 1000G1W / 1000K / 1000KCW |
| Сертификаты | CE / RoHS / UN38.3 |
| Гарантия | 12 months from shipment date |
Нужен стабильный план поставок? Отправьте список моделей, количество и место назначения. Мы подтвердим сроки выполнения, способ доставки и необходимые документы перед оформлением заказа.
Особенности и преимущества
📐 OEM Dimensions — Fits Stock Battery Cover
Physical dimensions are held to 57.36 × 35.83 × 13.25mm — matching the original PSP-110 footprint. The stock battery cover snaps shut without modification. Many aftermarket PSP batteries on the market ship slightly oversized, requiring a bulge-back replacement cover. This unit does not.
🔋 2200mAh — Honest Upgrade Over OEM 1800mAh
The OEM Sony PSP-110 shipped at 1800mAh. Our replacement delivers 2200mAh — approximately 22% more capacity — at the same physical size. At typical PSP-1000 power draw (gaming at default brightness), this translates to around 5–6 hours of playtime versus 4–4.5 hours on a new OEM cell. We do not label this cell at 3600mAh or 4800mAh; those numbers are physically impossible in this form factor.
🛡️ PCB Protection Circuit — Safe for Long Storage Periods
Many PSP-1000 units sit unused for months before being powered on again — a common pattern with retro gaming collections and repair shop inventory. The built-in PCB protection handles over-discharge lockout, preventing cell damage during extended storage periods, as well as over-charge and short-circuit protection during active use.
🏭 Consistent Batch Supply for Repair Shops
PSP-1000 repair volume is driven by the retro gaming community — a buyer segment that is growing, not shrinking. Repair shops stocking this SKU need batch-to-batch consistency for customer trust. Our cells are sourced from controlled production batches with <3% capacity variance. Small entry orders accepted; tiered pricing opens at higher volumes.
📦 B2B Supply Options
Stocked SKU with 3–5 business day lead time. OEM/white-label packaging available for repair chains and resellers. Contact us with target volume for pricing tiers and packaging options.
Упаковка и доставка
Сроки выполнения заказа и доставки
Товары в наличии: отправка в течение 3 дней.
Для стандартных моделей, имеющихся на складе.Заказы на серийное производство: отгрузка в течение 7 дней.
Для стандартных моделей, соответствующих подтвержденным техническим характеристикам и требованиям к упаковке.Индивидуальные заказы: отправка в течение 15 дней.
Для индивидуальной конфигурации ячеек, размера, проводов/разъемов, печатных плат/BMS, маркировки или упаковки.
Примечание: Окончательное время отправки зависит от общее количество, сложность модели, требования к упаковке и документы, подтверждающие соответствие требованиям к отгрузке.. Мы подтвердим предполагаемую дату отправки.ETD) после подтверждения заказа.
Авиаперевозки (срочные, небольшие объемы)
Морские перевозки (экономически выгодно для насыпных грузов)
Железнодорожный/автомобильный транспорт (в зависимости от пункта назначения)
Экспресс-каналы
Доступные документы: UN38.3 / Паспорт безопасности материала / Протокол транспортных испытаний (при наличии)
В зависимости от выбранного способа доставки может быть организована соответствующая упаковка и маркировка картонных коробок.
Доступны условия поставки EXW / FOB / CIF / DDP
Часто задаваемые вопросы
Q1: What is the difference between PSP-110 and PSP-S110 batteries?
A: These are two completely different battery sizes for different PSP models. PSP-110 is the larger cell (57.36 × 35.83 × 13.25mm) designed exclusively for the PSP-1000 “Fat” chassis. PSP-S110 is a smaller, thinner cell for the PSP-2000 and PSP-3000 Slim models. The two are not physically interchangeable — ordering PSP-S110 for a PSP-1000 is the most common compatibility error with PSP batteries.
Q2: Is a 2200mAh PSP-1000 battery safe to use, and will the stock cover still fit?
A: Yes on both counts. The PSP-110 battery bay in the PSP-1000 chassis has enough internal tolerance to accommodate cells up to approximately 2200–2400mAh without exceeding the physical envelope. Our 2200mAh replacement ships at the same 57.36 × 35.83 × 13.25mm dimensions as the OEM cell, so the original battery cover snaps shut without modification. Cells labeled at 3600mAh or higher in this same form factor are physically implausible — real capacity at this size tops out around 2200–2400mAh with grade-A cells.
Q3: Does the PSP-1000 battery need to be calibrated after replacement?
A: Yes, a conditioning cycle is recommended. After installing the new battery, charge it fully to 100%, then use the PSP until it shuts off automatically due to low battery. Repeat this full charge/discharge cycle 2–3 times. This allows the PSP’s battery meter to accurately map the new cell’s capacity curve. Skipping calibration won’t damage the battery, but the on-screen percentage indicator may read inaccurately for the first few sessions.
Q4: How long will a PSP-1000 run on a 2200mAh replacement battery?
A: At default screen brightness and typical gaming load, expect 5–6 hours per charge. Runtime varies with screen brightness (the single biggest drain factor on PSP-1000), Wi-Fi usage, and UMD drive activity. Comparing to a new OEM 1800mAh cell which delivers roughly 4–4.5 hours, the 2200mAh upgrade provides a meaningful improvement in sessions per charge.
Q5: What is the MOQ for wholesale PSP-110 battery orders?
A: We support low-volume entry orders for repair shops, retro gaming resellers, and service centers — no rigid high MOQ required. Tiered pricing unlocks at higher quantities. Sample testing before bulk commitment is supported. Contact us with your target volume for a current factory quote.
Q6: What shipping documentation is available for international orders?
A: UN38.3 test reports and MSDS/SDS documentation are provided as standard for all lithium-ion battery shipments. These cover IATA air freight compliance and most customs clearance requirements. We ship via DHL, FedEx, and sea freight depending on order volume. For bulk sea freight orders, packing declarations can be prepared to buyer specification.
Ищете больше портативных игровых устройств для распространения? Ознакомьтесь с нашим ассортиментом. Оптовая продажа аккумуляторов для портативных игровых консолей Категория для оптовых поставок и заводских цен.
