HDH-003 Battery for Nintendo Switch Lite — 3570mAh OEM Replacement & 4000mAh Upgrade, Factory Direct Supply
-
🎮 Dedicated Switch Lite battery — HDH-003 fits Nintendo Switch Lite (HDH-001) only; NOT compatible with Switch V1/V2/OLED (those use HAC-003)
-
⚡ Two capacities: 3.8V / 3570mAh / 13.6Wh (OEM spec) and 3.8V / 4000mAh / 15.2Wh (upgrade); P/N: HDH-003 / HDH-A-BPHAT-C0 / HDH-A-BPHAT-C1
-
🛠️ Pre-applied adhesive tape and shock foam included — battery is glued into chassis; replacement kits must include proper tools and adhesive backing
-
🏭 Factory-direct supply — Grade-A Li-ion cells, per-batch capacity verified, consistent output across volume orders
-
📦 Repair channel pricing — tiered wholesale rates for repair shops, gaming parts distributors, and OEM resellers
Описание продукта
Nintendo launched the Switch Lite in September 2019 as a dedicated handheld — no dock, no detachable Joy-Cons, a smaller 5.5-inch screen, and a sealed chassis. That sealed design is exactly what makes the HDH-003 battery a more technically demanding repair part than its HAC-003 counterpart in the standard Switch.
Unlike the mainline Switch where the battery is held in place with light adhesive and lifts out with a plastic spudger, the Switch Lite battery is bonded firmly to the midframe with strong industrial adhesive. The iFixit teardown team noted it as one of the more difficult battery extractions on the platform. Getting the old pack out without cracking the plastic battery well wall — a known failure point — requires isopropyl alcohol or adhesive remover, a proper stainless steel shovel/spudger, and patience. Repair shops that rush this step have the screw-stripped consoles and cracked frames to show for it.
We supply both the 3570mAh OEM-spec replacement and the 4000mAh upgrade option. Both include pre-applied adhesive tape and shock-absorbing foam — the two consumables that get skipped in low-quality kits and cause battery rattle after reassembly.
Verified Compatible Part Numbers:
-
Battery P/N: HDH-003
-
Cross-reference P/N: HDH-A-BPHAT-C0 / HDH-A-BPHAT-C1
-
Nintendo Switch Lite (2019) — HDH-001 (all regional variants)
⚠️ Critical: HDH-003 is только for the Nintendo Switch Lite (HDH-001). The mainline Switch V1/V2/OLED uses HAC-003 — a different size, different voltage, different connector. Do not substitute. Verify the model code on the console back before ordering stock.
Технические параметры
| Параметр | 3570mAh (OEM Spec) | 4000mAh (Upgrade Option) |
|---|---|---|
| Модель батареи | HDH-003 | |
| Cross-Reference P/N | HDH-A-BPHAT-C0 / HDH-A-BPHAT-C1 | |
| Номинальное напряжение | 3,8 В | |
| Емкость | 3570mAh / 13.6Wh | 4000mAh / 15.2Wh |
| vs. OEM Stock | Exact OEM match | +12% capacity increase |
| Химия клеток | Литий-ионный | |
| Размеры | 65.52 × 53.75 × 5.74mm (approx.) | |
| Срок службы цикла | ≥500 cycles to ≥80% capacity (IEC 61960) | |
| Installation Type | Glued (adhesive bond) — requires spudger + IPA removal | |
| Included Accessories | Pre-applied adhesive tape + shock-absorbing foam pad | |
| Совместимая модель | Nintendo Switch Lite HDH-001 (2019) — all regions | |
| Not Compatible With | Switch HAC-001 / HAC-001(-01) / Switch OLED HEG-001 | |
| Activation Required | Yes — 3–5 full charge/discharge cycles recommended | |
| Состояние | Brand New — 0% pre-cycle | |
| Сертификаты | CE / FCC / RoHS | |
| Warranty (Wholesale) | 12 месяцев | |
Нужен стабильный план поставок? Отправьте список моделей, количество и место назначения. Мы подтвердим сроки выполнения, способ доставки и необходимые документы перед оформлением заказа.
Особенности и преимущества
✅ 🛠️ Pre-Applied Adhesive + Shock Foam — The Parts Repair Shops Actually Need
The Switch Lite battery is glued into the chassis. Replacement kits that ship a bare cell with no adhesive leave technicians improvising with generic tape — which causes battery rattle, poor thermal contact, and comebacks. Every unit we supply includes pre-applied industrial-grade double-sided adhesive and shock-absorbing foam pad, matched to the original factory fitment. No improvising on the bench.
✅ 📊 3570mAh OEM Spec or 4000mAh Upgrade — Honest Numbers
The 3570mAh unit matches Nintendo’s factory spec: 3.8V / 13.6Wh, restoring the console to its original 3–7 hour runtime range. The 4000mAh upgrade adds approximately 12% more capacity — a genuine, measurable improvement within the physical constraints of the Switch Lite chassis. We don’t stock 5000mAh+ variants; the Switch Lite battery compartment dimensions don’t support those capacity claims without cell-level fraud.
✅ 🏭 Factory-Direct with Per-Batch Capacity Verification
We source cells and assemble in-house. Every production batch is capacity-tested before dispatch — no re-labeling, no gray-channel sourcing. Wholesale buyers can request batch test data. This matters for repair operations: a single returned console with a dead-on-arrival battery costs more in labor and reputation than the entire batch margin on that SKU.
✅ ⚠️ Glued Installation — We Document the Procedure Correctly
Removing the old HDH-003 requires isopropyl alcohol (90%+) or adhesive remover applied along the top edge of the battery well, a few minutes of dwell time, and a stainless steel spudger worked along the seam. The plastic battery well wall is a known fragile point — rushing or prying from the wrong angle snaps it. We include written installation notes with wholesale shipments and recommend technicians review the iFixit guide before first attempt.
✅ 📦 Repair Channel Volume Pricing — Recurring Supply Terms Available
HDH-003 is a consumable for repair shops serving the Switch Lite install base, which has been in market since 2019. Natural battery replacement demand is growing year-on-year as units age past the 3–4 year degradation window. We work with repair chains and regional distributors on recurring supply agreements with tiered pricing — contact our B2B desk with your monthly volume to get a structured quote.
✅ ⚙️ 500+ Cycle Rated Life Under IEC 61960 Conditions
Internal aging data confirms ≥80% capacity retention at 500 full cycles (1C rate, 25°C ambient). Switch Lite users typically charge once per day; that corresponds to roughly 18 months before noticeable degradation — a predictable replacement cadence for inventory planning in the repair channel.
Упаковка и доставка
Сроки выполнения заказа и доставки
Товары в наличии: отправка в течение 3 дней.
Для стандартных моделей, имеющихся на складе.Заказы на серийное производство: отгрузка в течение 7 дней.
Для стандартных моделей, соответствующих подтвержденным техническим характеристикам и требованиям к упаковке.Индивидуальные заказы: отправка в течение 15 дней.
Для индивидуальной конфигурации ячеек, размера, проводов/разъемов, печатных плат/BMS, маркировки или упаковки.
Примечание: Окончательное время отправки зависит от общее количество, сложность модели, требования к упаковке и документы, подтверждающие соответствие требованиям к отгрузке.. Мы подтвердим предполагаемую дату отправки.ETD) после подтверждения заказа.
Авиаперевозки (срочные, небольшие объемы)
Морские перевозки (экономически выгодно для насыпных грузов)
Железнодорожный/автомобильный транспорт (в зависимости от пункта назначения)
Экспресс-каналы
Доступные документы: UN38.3 / Паспорт безопасности материала / Протокол транспортных испытаний (при наличии)
В зависимости от выбранного способа доставки может быть организована соответствующая упаковка и маркировка картонных коробок.
Доступны условия поставки EXW / FOB / CIF / DDP
Часто задаваемые вопросы
Q1: Can the HDH-003 battery be used in the standard Nintendo Switch or Switch OLED?
A: No. HDH-003 is exclusively for the Nintendo Switch Lite (HDH-001). The standard Switch V1/V2 and Switch OLED all use HAC-003 — different voltage (3.7V vs 3.8V), different physical dimensions, different connector layout. Fitting the wrong battery is not a minor compatibility issue; the connector won’t seat correctly. Always verify the model code on the back of the unit: HDH-001 = Switch Lite, HAC-001/HEG-001 = mainline Switch family.
Q2: The Switch Lite battery is glued in. What’s the correct removal procedure to avoid breaking the chassis?
A: Apply 2–3 drops of 90%+ isopropyl alcohol or dedicated adhesive remover along the top edge of the battery well. Tilt the device to let it wick under the cell for 1–2 minutes. Work a stainless steel spudger along the edge — do not pry from corners or the plastic wall will crack. Slide a plastic card underneath once lifted and work slowly. Do not bend the cell while extracting. The top edge of the battery well is the weakest structural point; rushing here causes the most damage we see in warranty returns.
Q3: Why does the Switch Lite show poor battery life immediately after installing a new HDH-003?
A: New Li-ion cells need calibration before the Switch Lite’s fuel gauge reads accurately. Charge to 100%, then charge for an additional 2 hours. Drain completely until automatic shutdown. Repeat this cycle 3–5 times. The percentage display will stabilize after conditioning. If abnormal behavior persists beyond 5 full cycles — rapid drain, refusal to charge, or instant shutdown — contact us for a defect assessment.
Q4: Why don’t you stock 5000mAh or 6000mAh HDH-003 variants?
A: The Switch Lite battery well has fixed physical dimensions: approximately 65.52 × 53.75 × 5.74mm. To reach 5000mAh+ in that footprint at honest capacity, you’d need cell energy density that doesn’t exist at this form factor without the cell thickness exceeding the compartment depth. The 5000–8200mAh listings on Amazon are virtually all capacity-inflated products. Independent testing consistently measures them in the 3800–4400mAh range. We stock 4000mAh as the verified upper limit we can stand behind.
Q5: What is your order minimum and lead time for bulk HDH-003 supply?
A: No fixed MOQ. We handle evaluation samples and full production volume — contact our B2B team with your quantity and schedule for a tiered price list. Standard bulk lead time is 7–15 business days post-confirmation. Samples typically dispatch within 3–5 business days. We recommend a full installation test on sample units before committing to volume, given the adhesive removal step involved in this repair.
Q6: What warranty and defect support applies to wholesale orders?
A: All wholesale shipments carry a 12-month warranty from dispatch date. DOA rate is tracked per batch; if defectives exceed the agreed threshold, we replace or credit without dispute. Batch test records are provided on request. For OEM buyers at qualifying volumes, custom labeling and compliance documentation are available. We also provide written installation guidance for the adhesive removal process, which reduces technician error and lowers your DOA rate on the customer-side.
Ищете больше портативных игровых устройств для распространения? Ознакомьтесь с нашим ассортиментом. Оптовая продажа аккумуляторов для портативных игровых консолей Категория для оптовых поставок и заводских цен.
