Batterie de remplacement A2042 pour iPad Pro 11 pouces (2018) | 3,82 V 7 812 mAh 1S2P LiCoO₂ (compatible avec A1980, A1979, A2013 et A1934)
-
✅ Fits iPad Pro 11-inch 2018 (1st Gen) — A1980 (Wi-Fi), A1979 (Wi-Fi China), A2013 (Cellular Global), A1934 (Cellular alt); battery P/N A2042 / 020-02875 / 020-02507
-
✅ 3.82V / 7812mAh — 1S2P dual-cell parallel architecture; Grade-A LiCoO₂ (pure cobalt) soft-pack, cell-matched pairs; matte black finish
-
✅ Texas Instruments (TI) BMS chipset — precision fuel gauge, accurate iOS battery health reporting, superior thermal protection vs generic IC solutions
-
✅ CE, FCC, RoHS certified; UN38.3 compliant; 100% capacity-tested before shipment; DOA < 0.3%
-
✅ Factory direct — MOQ 50 pcs, mixed orders accepted; 12-month warranty; samples available
Description du produit
The iPad Pro 11-inch 2018 (1st generation) launched Apple’s current iPad Pro form factor — no Home button, Face ID, USB-C, Liquid Retina display. Units from this release are now well past their original battery service life: the global install base is large, the repair market is active, and A2042 is one of the more consistently demanded SKUs in the tablet battery category.
This replacement cell uses a 1S2P architecture — two pure LiCoO₂ (lithium cobalt oxide) soft-pack cells connected in parallel, cell-matched within ±20mAh before assembly. The delivered rating is 3.82V nominal at 7812mAh. The BMS chipset is a Texas Instruments solution, not a generic IC: TI’s fuel gauge algorithm communicates accurate state-of-charge data to iOS, which is why battery health percentage reads correctly after installation without extended calibration cycles. Generic BMS chipsets frequently cause erratic percentage display on iPad Pro models — this is the most common complaint on aftermarket batteries for this device.
Modèles compatibles vérifiés :
| Variante de l'appareil | Identifiant du modèle Apple |
|---|---|
| iPad Pro 11-inch Wi-Fi | A1980 |
| iPad Pro 11-inch Wi-Fi (China) | A1979 |
| iPad Pro 11-inch Wi-Fi + Cellular (Global) | A2013 |
| iPad Pro 11-inch Wi-Fi + Cellular (Alt) | A1934 |
| Référence de la batterie | A2042 / 020-02875 / 020-02507 |
⚠️ Not compatible with iPad Pro 11-inch 2nd Gen (2020, A2228/A2068) or later generations. Form factor is similar but battery P/N and connector routing differ. Verify model number on back housing before ordering.
Paramètres techniques
| Paramètre | Spécification |
|---|---|
| Référence de la batterie | A2042 / 020-02875 / 020-02507 |
| Modèles compatibles | iPad Pro 11\” 2018 — A1980 / A1979 / A2013 / A1934 |
| Configuration cellulaire | 1S2P (dual-cell parallel, matched ±20mAh) |
| Tension nominale | 3,82 V |
| Capacité | 7812mAh |
| Chimie cellulaire | LiCoO₂ (Pure Lithium Cobalt Oxide) |
| Type de cellule | Li-ion Polymer soft-pack (Grade A) |
| BMS Chipset | Texas Instruments (TI) — precision fuel gauge, thermal protection |
| Tension de charge (max.) | 4.35V ± 0.05V |
| Coupure de décharge | 2,75 V |
| Charging Interface | USB-C Power Delivery compatible |
| Cycle de vie | ≥ 600 cycles @ 80% DOD |
| Température de fonctionnement | 0°C ~ 45°C (charge) / -20°C ~ 60°C (décharge) |
| Exterior Color | Noir mat |
| Type de connecteur | ZIF FPC, OEM-compatible |
| Protection (PCM) | Overcharge / over-discharge / short circuit / over-current |
| Certifications | CE, FCC, RoHS, UN38.3; MSDS/SDS on request |
| Condition | Brand new, 0 cycle, 100% capacity-tested |
| Garantie | 12 mois à compter de la date d'expédition |
| MOQ | 50 pcs (mixed orders accepted) |
| Délai de livraison (en stock) | 3 à 5 jours ouvrables |
| Conditionnement | Anti-static bag + foam box; retail packaging from 200 pcs |
Besoin d'un plan d'approvisionnement stable ? Envoyez-nous la liste des modèles, les quantités et la destination. Nous vous confirmerons le délai de livraison, le mode d'expédition et les documents de conformité avant que vous ne passiez commande.
Caractéristiques et avantages
✅ 🔋 1S2P Pure Cobalt — Matched-Pair Assembly
Two LiCoO₂ cells graded and paired within ±20mAh before parallel connection. Cell imbalance is the primary cause of premature capacity loss in dual-cell designs — this step is skipped by most aftermarket suppliers. Delivered output: ≥ 7812mAh actual measured capacity.
✅ 🧠 Texas Instruments BMS Chipset
TI’s fuel gauge IC communicates accurate state-of-charge data to iPadOS. Battery health percentage displays correctly from first charge. Generic IC chipsets on competing aftermarket batteries frequently cause erratic percentage readouts and false low-battery warnings on this model — a known pain point for repair shops getting return complaints.
✅ ⚡ USB-C PD Compatible PCM
PCM overcharge cutoff at 4.35V, over-discharge at 2.75V — tuned for the iPad Pro 11 2018’s USB-C Power Delivery charging profile. Standard Lightning-era PCM designs are not rated for this input; this one is.
✅ 📋 CE, FCC & RoHS — Import Documentation as Standard
CE (EU), FCC (US), RoHS, and UN38.3 test reports provided with bulk orders. MSDS/SDS on request. No separate documentation chase needed for repeat customers — documents ship with the order.
✅ 📦 MOQ 50 pcs — Mixed SKU Orders Accepted
Minimum 10 pcs. Mix with other iPad or tablet battery SKUs from our catalog — counts toward the same threshold. Custom labeling from 200 pcs. Free samples before volume commitment; buyer covers freight.
Emballage et livraison
Délai de livraison et expédition
Articles en stock : expédiés sous 3 jours
Pour les modèles de remplacement standard disponibles en stock.Commandes en gros : expédition sous 7 jours
Pour les modèles standards, sous réserve de spécifications et d'exigences d'emballage confirmées.Commandes personnalisées : expédition sous 15 jours
Pour une configuration de cellule personnalisée, taille, câblage/connecteur, PCB/BMS, étiquetage ou emballage.
Note: Le délai d'expédition final dépend de quantité totale, complexité du modèle, exigences d'emballage et documents de conformité d'expédition. Nous vous confirmerons la date d'expédition estimée (ETD) après confirmation de la commande.
Fret aérien (urgent, petit volume)
Transport maritime (économique pour les commandes en gros)
Transport ferroviaire / routier (selon la destination)
Chaînes express
Documents disponibles : UN38.3 / FDS / Rapport d'essai de transport (le cas échéant)
L'emballage conforme et l'étiquetage des cartons peuvent être réalisés en fonction du mode d'expédition choisi.
EXW / FOB / CIF / DDP disponibles
Un seul fournisseur pour l'écosystème Apple complet
-Rationalisez votre chaîne d'approvisionnement. Regroupez vos commandes de batteries pour MacBook, iPad, iPhone et Apple Watch en un seul envoi afin de réduire les coûts logistiques et de maximiser vos marges de vente en gros.
FAQ
Q1: Which iPad Pro 11-inch 2018 models does this battery fit?
A: This battery fits all variants of the iPad Pro 11-inch 2018 (1st generation): A1980 (Wi-Fi), A1979 (Wi-Fi China), A2013 (Cellular Global), and A1934 (Cellular alt). Battery P/N is A2042, Apple internal codes 020-02875 and 020-02507. It does not fit the iPad Pro 11-inch 2nd Gen (2020) or later — verify the model number on the back housing before ordering.
Q2: Why does the BMS chipset matter — what’s different about a TI solution?
A: The battery management IC controls how the battery communicates its state-of-charge to iPadOS. Texas Instruments’ fuel gauge algorithm is calibrated for Apple’s battery reporting protocol. Batteries with generic IC chipsets frequently display inaccurate battery percentages, trigger false low-battery shutdowns, or show inflated health readings on the iPad Pro 11 2018. TI-based designs eliminate these issues — which is why repair shops see fewer return complaints compared to generic alternatives.
Q3: What does 1S2P mean for this battery?
A: 1S2P means two cells in parallel. To reach 7812mAh within the iPad Pro 11’s physical housing, two individual LiCoO₂ cells are connected in parallel. The production-critical step is cell matching: both cells must measure within ±20mAh of each other before assembly. Unmatched cells cause one cell to bear disproportionate load, accelerating degradation and reducing effective capacity faster than a single-cell design would. Our cells are matched before assembly.
Q4: Does this battery need calibration after installation?
A: The TI BMS chip handles accurate fuel gauge reporting from the first charge. For best initial iOS battery health percentage accuracy, run 1–2 full charge/discharge cycles post-installation. This is a gauge calibration step only — the cell delivers full capacity from cycle one regardless.
Q5: What is the MOQ and can I combine with other tablet battery SKUs?
A: MOQ is 50 pcs. Mixed orders combining this SKU with other iPad or tablet battery models in our catalog count toward the same 50-pc threshold — no per-SKU minimums. Stock orders ship in 3–5 business days. Free samples available before any volume commitment; buyer covers outbound freight.
Q6: What certifications are included and are documents available for customs clearance?
A: CE (EU), FCC (US), RoHS, and UN38.3 (air transport). MSDS and SDS on request. Batch test reports — capacity, voltage, BMS function — can accompany each shipment. All documents provided as standard with bulk orders, no additional lead time required.
