PT476577-3S1P 5000mAh 11.55V Replacement Battery for AYANEO 2 / 2S / 3 / GEEK / GEEK 1S / Air Series Handheld Gaming Console
-
🔋 5000mAh / 57.75Wh, 11.55V — matches OEM spec precisely; P/N: PT476577-3S1P
-
🎮 Wide compatibility: AYANEO 2, 2S, 3, GEEK, GEEK 1S, Air series (11.55V models)
-
⚡ 3S1P cell configuration — 3× grade A Li-ion cells in series; fully charged at 13.2V (4.4V × 3)
-
🏭 Factory direct supply — consistent cell grading, low MOQ, competitive bulk pricing
-
🛡️ Built-in PCB protection: over-charge, over-discharge, short-circuit, over-temperature
-
📦 Supports OEM labeling; custom packaging available for repair shops and distributors
Description du produit
The AYANEO 2 / 2S / 3 / GEEK / GEEK 1S / Air series all share a common 7-inch Windows handheld chassis platform, and the battery pack across these models is standardized around the same core specification. When a unit’s original pack degrades — typically after 500–800 charge cycles in heavy gaming use — the console drops into forced low-power throttling or fails to hold charge past 60 minutes. This replacement pack is engineered to the same electrical profile as the factory-installed cell, restoring full-session gaming capacity.
Compatible Models & OEM Part Numbers:
| Modèle d'appareil | OEM Battery P/N |
|---|---|
| AYANEO 2 | PT476577-3S1P |
| AYANEO 2S | PT476577-3S1P |
| AYANEO 3 | PT476577-3S1P |
| AYANEO GEEK | PT476577-3S1P |
| AYANEO GEEK 1S | PT476577-3S1P |
| AYANEO Air Series (11.55V variants) | PT476577-3S1P |
⚠️ Note de compatibilité : Always verify your existing battery’s voltage label reads 11.55V before ordering. AYANEO Air and Air Pro models use a different, smaller battery pack — do not cross-order by device name alone.
Paramètres techniques
| Paramètre | Spécification |
|---|---|
| Part Number (P/N) | PT476577-3S1P |
| Tension nominale | 11,55 V |
| Fully Charged Voltage | 13.2V (4.4V × 3 cells) |
| Capacité | 5000mAh / 57.75Wh |
| Configuration cellulaire | 3S1P (3 cells in series) |
| Chimie cellulaire | Lithium-Ion (Li-ion) |
| Qualité cellulaire | Grade A, <3% capacity variance |
| Circuit de protection | Over-charge / Over-discharge / Short-circuit / NTC Temp |
| Température de fonctionnement | 0°C – 45°C (charging); -20°C – 60°C (storage) |
| Cycle Life (rated) | ≥500 cycles to 80% capacity |
| Type de connecteur | OEM-matched plug-in connector (no soldering required) |
| Appareils compatibles | AYANEO 2, 2S, 3, GEEK, GEEK 1S, Air Series (11.55V) |
| Certifications | CE / RoHS / UN38.3 |
| Garantie | 12 mois à compter de la date d'expédition |
Besoin d'un plan d'approvisionnement stable ? Envoyez-nous la liste des modèles, les quantités et la destination. Nous vous confirmerons le délai de livraison, le mode d'expédition et les documents de conformité avant que vous ne passiez commande.
Caractéristiques et avantages
🔋 Identical Electrical Profile to OEM
5000mAh / 57.75Wh at 11.55V nominal. The 3S1P architecture means three 3.85V cells in series — same as the factory pack — so BMS firmware on the host device reads capacity data accurately without recalibration errors.
⚙️ Grade A Cell Construction
Each cell is sourced from consistent production batches, graded for <3% capacity variance across the pack. This matters for repair shop customers who need predictable, repeatable results across every unit they service.
🛡️ Multi-Layer PCB Protection Circuit
Integrated protection IC handles over-charge cutoff at 13.2V (4.4V/cell), over-discharge lockout at ~9V, short-circuit cut, and NTC-based temperature monitoring. The device’s original BMS communication connector is maintained.
🏭 B2B Factory Supply Advantage
Sourced directly from the production line — no middlemen markups. Repair shops, service centers, and distributors can order in small batches to start, with tiered pricing unlocked at higher volumes. Lead time for stocked SKUs is 3–5 business days.
📦 OEM & Private Label Ready
Custom packaging, brand labeling, and barcode integration are supported for resellers who want a white-label product under their own repair shop or distribution brand. Minimum artwork customization run is negotiable.
🔧 Solder-Free Connector Design
The replacement pack ships with the original connector type, allowing direct plug-in swap during repair. No wire splicing needed — critical for repair technicians working at volume.
Emballage et livraison
Délai de livraison et expédition
Articles en stock : expédiés sous 3 jours
Pour les modèles de remplacement standard disponibles en stock.Commandes en gros : expédition sous 7 jours
Pour les modèles standards, sous réserve de spécifications et d'exigences d'emballage confirmées.Commandes personnalisées : expédition sous 15 jours
Pour une configuration de cellule personnalisée, taille, câblage/connecteur, PCB/BMS, étiquetage ou emballage.
Note: Le délai d'expédition final dépend de quantité totale, complexité du modèle, exigences d'emballage et documents de conformité d'expédition. Nous vous confirmerons la date d'expédition estimée (ETD) après confirmation de la commande.
Fret aérien (urgent, petit volume)
Transport maritime (économique pour les commandes en gros)
Transport ferroviaire / routier (selon la destination)
Chaînes express
Documents disponibles : UN38.3 / FDS / Rapport d'essai de transport (le cas échéant)
L'emballage conforme et l'étiquetage des cartons peuvent être réalisés en fonction du mode d'expédition choisi.
EXW / FOB / CIF / DDP disponibles
FAQ
Q1: Is the PT476577-3S1P battery compatible with all AYANEO 2S units?
A: Yes, all AYANEO 2S units shipped with the 11.55V battery use the PT476577-3S1P pack. That said, always check the voltage label on your original battery before ordering — it should read 11.55V or 11.61V. The 2S, 2, 3, GEEK, and GEEK 1S all share this spec. AYANEO Air models smaller than the 7-inch full-size series use a different battery.
Q2: How long does the AYANEO 2S battery last, and when should I replace it?
A: The OEM pack is rated for approximately 500–800 full cycles before capacity drops below 80%. In real-world use at 15–22W TDP — typical for demanding games — that translates to roughly 18–30 months of daily gaming. If your console no longer charges above 60–70% or shuts down unexpectedly under load, the pack needs replacing.
Q3: Does installing a replacement battery void the warranty?
A: AYANEO designed the 2S to be user-serviceable — the retail box even includes a pry tool for opening the chassis. That said, warranty terms vary by region and retailer. If your device is still under the manufacturer’s warranty period, contact AYANEO support before opening the unit.
Q4: What is the minimum order quantity (MOQ) for wholesale or repair shop orders?
A: We support small batch orders for repair shops and service centers getting started, with no fixed high MOQ requirement. Tiered volume pricing applies at higher quantities. Contact us directly for a factory quote with specific pricing tiers.
Q5: What is the lead time and shipping arrangement for bulk orders?
A: For stocked SKUs, the lead time is 3–5 business days. Larger custom or OEM-labeled orders depend on production schedule — typically 10–15 business days. We ship via DHL, FedEx, and sea freight depending on order volume. UN38.3 documentation is provided for air freight compliance.
Q6: Can you provide OEM or private label packaging for this battery?
A: Yes. We support custom packaging with your brand name, barcode, and product labeling. This is commonly used by repair shop chains, electronics distributors, and online resellers. Minimum run for custom packaging is negotiable — contact us to discuss artwork requirements and MOQ thresholds.
Vous recherchez d'autres modèles de consoles portables de jeu à distribuer ? Consultez notre catalogue. Batteries pour consoles de jeux portables en gros catégorie pour la fourniture en gros et les prix d'usine.
