Сменный аккумулятор для iPad 2 A1376 616-0561 | Литий-ионный 3,8 В 6500 мАч для моделей A1395 A1396 A1397 A1316
-
✅ Fits iPad 2 Wi-Fi / 3G — models A1395, A1396, A1397; P/N A1376, 616-0559, 616-0561, 616-0576
-
✅ Rated 3.8V / 6500mAh / 25Wh — matches OEM spec precisely
-
✅ Grade-A LiCoO₂ cells with triple-layer protection circuit (overcharge / over-discharge / short circuit)
-
✅ CE, FCC certified; every unit 100% capacity-tested before shipment
-
✅ Factory direct — competitive tiered pricing from MOQ 50 pcs; mixed models accepted
-
✅ Includes full installation tool kit; ready for repair shop or refurbishment line use
Описание продукта
The iPad 2 (2011–2014) remains widely deployed across school systems, enterprise kiosk setups, and consumer refurbishment channels worldwide. The original battery — part number A1376, Apple internal code 616-0561 — degrades to below 80% capacity after roughly 500–600 real-world charge cycles, which for moderate daily users means 2–3 years of service life. At that point, replacing the battery is far more economical than swapping the unit.
This cell is rated at 3.8V nominal with a capacity of 6500mAh / 25Wh, using a Li-ion chemistry, consistent with original Apple specifications. Our factory produces to identical dimensional and electrical tolerances, ensuring the connector drops straight onto the iPad 2 logic board without modification.
Verified Compatible Models / Original Part Numbers:
| Device Variant | Apple Model ID | OEM P/N |
|---|---|---|
| iPad 2 Wi-Fi | A1395 | A1376 |
| iPad 2 Wi-Fi + 3G (GSM) | A1396 | 616-0559 |
| iPad 2 Wi-Fi + 3G (CDMA) | A1397 | 616-0561 |
| iPad 2 (1st revision PCB) | A1316 | 616-0576 |
⚠️ Not compatible with iPad Air, iPad 3, or iPad 4. Always verify the model number printed on the back housing before ordering.
Технические параметры
| Параметр | Спецификация |
|---|---|
| Battery Model / P/N | A1376 / 616-0559 / 616-0561 / 616-0576 |
| Номинальное напряжение | 3,8 В |
| Емкость | 6500mAh / 25Wh |
| Химия клеток | LiCoO₂ (оксид лития-кобальта) |
| Тип клетки | Li-ion Polymer (soft-pack) |
| Charge Voltage (Max) | 4.20V ± 0.05V |
| Discharge Cut-off | 2,75 В |
| Срок службы цикла | ≥ 600 cycles @ 80% DOD |
| Рабочая температура | 0°C ~ 45°C (charge) / -20°C ~ 60°C (discharge) |
| Размеры | 195mm × 119mm × 2.5mm |
| Масса | Approx. 270g |
| Тип разъема | ZIF, OEM-compatible |
| Защитная цепь | PCM (overcharge / over-discharge / short circuit) |
| Сертификаты | CE, FCC, UN38.3, MSDS / SDS available |
| Гарантия | 12 months from shipment date |
| Минимальный объем заказа | 50 pcs (mixed order accepted > 50 pcs) |
| Lead Time (Stock) | 3–5 business days |
| Упаковка | Anti-static bag + foam box; custom retail packaging available |
Нужен стабильный план поставок? Отправьте список моделей, количество и место назначения. Мы подтвердим сроки выполнения, способ доставки и необходимые документы перед оформлением заказа.
Особенности и преимущества
✅ 🔋 Grade-A Cells, OEM-Equivalent Capacity
Each cell is graded at ≥ 6500mAh actual measured capacity — not rated. We reject any cell testing below 98% of nominal before assembly. Your end customers get the same runtime as a new device.
✅ 🛡️ Three-Layer Protection Circuit (PCM)
The built-in PCM guards against overcharge (> 4.25V cutoff), over-discharge (< 2.75V cutoff), and short circuit. This is non-negotiable for repair shop liability and end-user safety.
✅ 📋 CE & FCC Certified — Customs-Ready
All units ship with current CE (EU) and FCC (US) declarations of conformity. Supports smooth customs clearance into North America and Europe — critical for volume importers.
✅ 🔌 Plug-and-Play Connector
ZIF connector pitch and cable length match the OEM spec exactly. No re-pinning, no adapter needed. Tested fit on iPad 2 Wi-Fi, GSM, and CDMA variants.
✅ 📦 B2B Ready: Low MOQ, Mixed Orders Accepted
Minimum order is 50 pcs. Mixed orders (combining with other tablet battery SKUs from our catalog) count toward the same threshold. Custom labeling and retail-ready packaging available from 200 pcs.
✅ 🔧 Full Tool Kit Included
Every unit ships with a plastic spudger, Phillips #00 driver, and adhesive strips. Repair shops can move directly to installation — no sourcing separate tooling.
Упаковка и доставка
Сроки выполнения заказа и доставки
Товары в наличии: отправка в течение 3 дней.
Для стандартных моделей, имеющихся на складе.Заказы на серийное производство: отгрузка в течение 7 дней.
Для стандартных моделей, соответствующих подтвержденным техническим характеристикам и требованиям к упаковке.Индивидуальные заказы: отправка в течение 15 дней.
Для индивидуальной конфигурации ячеек, размера, проводов/разъемов, печатных плат/BMS, маркировки или упаковки.
Примечание: Окончательное время отправки зависит от общее количество, сложность модели, требования к упаковке и документы, подтверждающие соответствие требованиям к отгрузке.. Мы подтвердим предполагаемую дату отправки.ETD) после подтверждения заказа.
Авиаперевозки (срочные, небольшие объемы)
Морские перевозки (экономически выгодно для насыпных грузов)
Железнодорожный/автомобильный транспорт (в зависимости от пункта назначения)
Экспресс-каналы
Доступные документы: UN38.3 / Паспорт безопасности материала / Протокол транспортных испытаний (при наличии)
В зависимости от выбранного способа доставки может быть организована соответствующая упаковка и маркировка картонных коробок.
Доступны условия поставки EXW / FOB / CIF / DDP
Комплексные поставки для всей экосистемы Apple.
— Оптимизируйте свою цепочку поставок. Объедините заказы на аккумуляторы для MacBook, iPad, iPhone и Watch в одну партию, чтобы снизить логистические затраты и максимизировать оптовую прибыль.
Часто задаваемые вопросы
Q1: Which exact iPad 2 models is this battery compatible with?
A: This battery fits all iPad 2 variants: A1395 (Wi-Fi), A1396 (GSM 3G), and A1397 (CDMA 3G). The OEM part numbers it replaces are A1376, 616-0559, 616-0561, and 616-0576. It does not fit iPad Air, iPad 3, or iPad 4 — different form factor and connector.
Q2: How long will the replaced battery last on a full charge?
Under real-world conditions, a healthy iPad 2 battery delivers roughly 9–11 hours of mixed use — Wi-Fi browsing, video playback, or music. A worn original battery drops well below that. A new replacement restores runtime to near-new levels.
Q3: Does this battery need to be activated or calibrated after installation?
A: No activation is required. For best initial accuracy of the battery percentage indicator, run 2–3 full charge/discharge cycles after installation. Charge to 100%, discharge to around 5%, then recharge fully. This calibrates the fuel gauge IC, not the cell itself.
Q4: What is the minimum order quantity (MOQ) and can I mix with other models?
A: MOQ is 50 pcs. Mixed orders across different tablet battery SKUs in our catalog count toward the same 50-pc threshold. This is designed for repair shops and distributors running multiple product lines simultaneously.
Q5: What certifications does this battery carry, and are documents available?
A: Each batch carries CE (EU LVD/EMC), FCC (US), and UN38.3 (air transport). MSDS/SDS documentation is available on request. These are required for legal import into the US, EU, and most other regulated markets.
Q6: What is the warranty and return policy for bulk orders?
A: All units carry a 12-month warranty from shipment date. DOA rate is guaranteed below 0.3%. For bulk orders, we accept returns or replacements for any confirmed defective units within the warranty period. Pre-shipment, we offer free samples (buyer pays shipping) so you can verify fit and performance before committing to volume.
Сопутствующие товары
