LR4867102-3S 65.84Wh 13.2V Replacement Battery for AOKZOE A1 PRO / A1L / A2 / A1 Handheld Gaming PC
-
🔋 13.2V / 65.84Wh — OEM-matched spec for AOKZOE A1 series; P/N: LR4867102-3S
-
🎮 Verified compatibility: AOKZOE A1 PRO, A1L, A2, A1 (all 13.2V variants)
-
⚡ 8-pin flex cable connector — direct board-level replacement, no wiring modification
-
🛡️ Multi-layer protection PCB: over-charge, over-discharge, over-current, thermal cutoff
-
🏭 Factory direct supply — grade A Li-ion cells, consistent batch spec, low MOQ entry
-
📦 OEM labeling and custom packaging supported for repair distributors and service chains
Описание продукта
The AOKZOE A1 series — covering the A1, A1L, A1 PRO, and A2 — all run on the same internal battery platform. AOKZOE designed these devices as premium Windows handheld PCs targeting the high-performance segment, and the 65Wh battery pack reflects that: it is one of the larger internal cells in the compact handheld category, sitting above most mid-range competitors. The OEM part number LR4867102-3S is consistent across the full A1 lineup, which means a single SKU covers all four devices.
In practice, the 13.2V pack is a Li-ion multi-cell configuration with an 8-pin flex cable connector for board communication — this is not a simple JST plug-in cell like the retro handheld category. The connector carries both power and BMS data lines, so the replacement must match the original pin-out to avoid charging errors or capacity reporting issues. This unit does.
Verified Compatible Models & OEM Part Numbers:
| Устройство | OEM Battery P/N | Номинальная грузоподъемность | Напряжение |
|---|---|---|---|
| AOKZOE A1 PRO | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1L | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A2 | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1 | LR4867102-3S | 65.84Wh | 13.2V |
⚠️ Connector verification required before ordering. The LR4867102-3S uses an 8-pin flex cable. Confirm your original battery’s connector type and pin layout matches before purchasing — particularly for units that may have received factory hardware revisions.
Технические параметры
| Параметр | Спецификация |
|---|---|
| OEM Part Number (P/N) | LR4867102-3S |
| Номинальное напряжение | 11,55 В |
| Fully Charged Voltage | 13.2V (4.4V × 3 cells) |
| Номинальная грузоподъемность | 5700mAh / 65.84Wh |
| Химия клеток | Lithium-Ion (Li-ion) |
| Клеточный класс | Grade A, ≤3% capacity variance |
| Конфигурация ячейки | 3S (3 cells in series) |
| Тип разъема | 8-pin flex cable (OEM-matched pinout) |
| Защитная цепь | Over-charge / Over-discharge / Short-circuit / NTC thermal |
| Physical Dimensions | 105.80 × 76.30 × 14.00mm |
| Вес нетто | ~263g |
| Рабочая температура | 0°C – 45°C (charging); −20°C – 60°C (storage) |
| Cycle Life (rated) | ≥500 cycles to 80% capacity |
| Совместимые устройства | AOKZOE A1 PRO / A1L / A2 / A1 |
| Сертификаты | CE / RoHS / UN38.3 |
| Гарантия | 12 months from shipment date |
Нужен стабильный план поставок? Отправьте список моделей, количество и место назначения. Мы подтвердим сроки выполнения, способ доставки и необходимые документы перед оформлением заказа.
Особенности и преимущества
⚡ Full 65.84Wh Capacity — OEM Spec, Not a Downgrade
Rated at 65.84Wh to match the factory-installed pack in the AOKZOE A1 PRO and A1L. At typical TDP levels of 15–25W on Ryzen 7 7840U hardware, this translates to roughly 2–3 hours of gaming load per charge — identical to factory runtime expectations, not a degraded aftermarket substitute.
🔌 8-Pin Flex Cable Connector — Board-Level Compatible
The A1 series uses an 8-pin flex cable for battery-to-board communication, carrying both power rails and BMS data. This replacement ships with the correct connector pinout, ensuring the device firmware reads charge state, capacity, and health data accurately from day one. No pin remapping, no calibration workaround required.
🛡️ Integrated Multi-Layer Protection Circuit
Over-charge cutoff at 13.2V (4.4V per cell), over-discharge lockout, short-circuit protection, and NTC-based thermal monitoring. The protection circuit is designed to work alongside the host device’s own BMS firmware — not to conflict with it.
🏭 One P/N Covers Four Device Models
AOKZOE standardized the LR4867102-3S across the A1, A1L, A1 PRO, and A2. For repair shops and service centers carrying AOKZOE units, stocking this single SKU covers the brand’s entire first-generation handheld lineup. Lower inventory complexity, broader repair coverage.
📦 Repair Shop & Distributor Supply
Sourced from consistent production batches with <3% capacity variance cell-to-cell. Small batch entry orders accepted — no commitment to high opening MOQ. Tiered pricing opens as volume scales. Custom OEM packaging available for resellers building their own repair parts brand.
Упаковка и доставка
Сроки выполнения заказа и доставки
Товары в наличии: отправка в течение 3 дней.
Для стандартных моделей, имеющихся на складе.Заказы на серийное производство: отгрузка в течение 7 дней.
Для стандартных моделей, соответствующих подтвержденным техническим характеристикам и требованиям к упаковке.Индивидуальные заказы: отправка в течение 15 дней.
Для индивидуальной конфигурации ячеек, размера, проводов/разъемов, печатных плат/BMS, маркировки или упаковки.
Примечание: Окончательное время отправки зависит от общее количество, сложность модели, требования к упаковке и документы, подтверждающие соответствие требованиям к отгрузке.. Мы подтвердим предполагаемую дату отправки.ETD) после подтверждения заказа.
Авиаперевозки (срочные, небольшие объемы)
Морские перевозки (экономически выгодно для насыпных грузов)
Железнодорожный/автомобильный транспорт (в зависимости от пункта назначения)
Экспресс-каналы
Доступные документы: UN38.3 / Паспорт безопасности материала / Протокол транспортных испытаний (при наличии)
В зависимости от выбранного способа доставки может быть организована соответствующая упаковка и маркировка картонных коробок.
Доступны условия поставки EXW / FOB / CIF / DDP
Часто задаваемые вопросы
Q1: Is the LR4867102-3S battery compatible with all AOKZOE A1 series models?
A: Yes. AOKZOE used the LR4867102-3S across the A1, A1L, A1 PRO, and A2 — all four share the same 65.84Wh / 13.2V internal battery spec and 8-pin flex cable connector. Before ordering, confirm your original battery’s label shows LR4867102-3S and verify the connector type matches. Units with factory hardware revisions may have minor connector differences.
Q2: How long does the AOKZOE A1 Pro battery last, and when does it need replacing?
A: The A1 PRO ships with a 65Wh pack. At typical gaming TDP (15–25W on Ryzen 7 7840U), runtime ranges from roughly 2 to 3 hours per charge. Degradation below 80% capacity typically occurs after 500–700 cycles — around 18–24 months of daily use. Signs you need a replacement: runtime drops under 90 minutes, the device shuts off under gaming load before showing low battery, or the battery indicator becomes erratic.
Q3: Does the AOKZOE A1 Pro battery require activation or calibration after replacement?
A: No special activation sequence is required. After installation, fully charge the pack to 100% before first use — the device’s BMS will read the new cell’s capacity profile automatically. Some users report the battery percentage display recalibrating over the first 2–3 full charge cycles; this is normal and not a defect.
Q4: What connector type does the LR4867102-3S use, and is it a plug-in swap?
A: The LR4867102-3S uses an 8-pin flex cable connector for board-level communication. This is not a simple JST snap-in cell — the flex cable carries both power and BMS data lines. The replacement ships with the correct pinout matched to the A1 series board. Replacement requires opening the device chassis, disconnecting the original flex cable, and connecting the replacement. Technicians familiar with gaming handheld teardowns can complete this in 20–30 minutes.
Q5: What is the MOQ for wholesale or repair shop orders?
A: We accept small batch entry orders for repair shops and service centers — no high opening MOQ required. Volume pricing tiers unlock at higher quantities. Contact us for a current factory quote with lead time and pricing breakdown.
Q6: What lead time and shipping documentation applies for bulk orders?
A: Stocked SKUs ship within 3–5 business days. Custom or OEM-labeled orders run 10–15 business days depending on production schedule. We ship via DHL, FedEx, and sea freight. UN38.3 test reports and MSDS/SDS documentation are provided as standard for all lithium-ion battery shipments, covering air freight compliance and customs requirements.
Ищете больше портативных игровых устройств для распространения? Ознакомьтесь с нашим ассортиментом. Оптовая продажа аккумуляторов для портативных игровых консолей Категория для оптовых поставок и заводских цен.
