iPad 2 Replacement Battery A1376 616-0561 | 3.8V 6500mAh Li-ion for A1395 A1396 A1397 A1316
-
✅ Fits iPad 2 Wi-Fi / 3G — models A1395, A1396, A1397; P/N A1376, 616-0559, 616-0561, 616-0576
-
✅ Rated 3.8V / 6500mAh / 25Wh — matches OEM spec precisely
-
✅ Grade-A LiCoO₂ cells with triple-layer protection circuit (overcharge / over-discharge / short circuit)
-
✅ CE, FCC certified; every unit 100% capacity-tested before shipment
-
✅ Factory direct — competitive tiered pricing from MOQ 50 pcs; mixed models accepted
-
✅ Includes full installation tool kit; ready for repair shop or refurbishment line use
Descrição do produto
The iPad 2 (2011–2014) remains widely deployed across school systems, enterprise kiosk setups, and consumer refurbishment channels worldwide. The original battery — part number A1376, Apple internal code 616-0561 — degrades to below 80% capacity after roughly 500–600 real-world charge cycles, which for moderate daily users means 2–3 years of service life. At that point, replacing the battery is far more economical than swapping the unit.
This cell is rated at 3.8V nominal with a capacity of 6500mAh / 25Wh, using a Li-ion chemistry, consistent with original Apple specifications. Our factory produces to identical dimensional and electrical tolerances, ensuring the connector drops straight onto the iPad 2 logic board without modification.
Verified Compatible Models / Original Part Numbers:
| Device Variant | Apple Model ID | OEM P/N |
|---|---|---|
| iPad 2 Wi-Fi | A1395 | A1376 |
| iPad 2 Wi-Fi + 3G (GSM) | A1396 | 616-0559 |
| iPad 2 Wi-Fi + 3G (CDMA) | A1397 | 616-0561 |
| iPad 2 (1st revision PCB) | A1316 | 616-0576 |
⚠️ Not compatible with iPad Air, iPad 3, or iPad 4. Always verify the model number printed on the back housing before ordering.
Parâmetros técnicos
| Parâmetro | Especificação |
|---|---|
| Battery Model / P/N | A1376 / 616-0559 / 616-0561 / 616-0576 |
| Tensão Nominal | 3,8V |
| Capacidade | 6500mAh / 25Wh |
| Química Celular | LiCoO₂ (Óxido de Lítio e Cobalto) |
| Tipo de célula | Li-ion Polymer (soft-pack) |
| Charge Voltage (Max) | 4.20V ± 0.05V |
| Discharge Cut-off | 2,75V |
| Ciclo de vida | ≥ 600 cycles @ 80% DOD |
| Temperatura de operação | 0°C ~ 45°C (charge) / -20°C ~ 60°C (discharge) |
| Dimensões | 195mm × 119mm × 2.5mm |
| Peso | Approx. 270g |
| Tipo de conector | ZIF, OEM-compatible |
| Circuito de proteção | PCM (overcharge / over-discharge / short circuit) |
| Certificações | CE, FCC, UN38.3, MSDS / SDS available |
| Garantia | 12 months from shipment date |
| MOQ | 50 pcs (mixed order accepted > 50 pcs) |
| Lead Time (Stock) | 3–5 business days |
| Embalagem | Anti-static bag + foam box; custom retail packaging available |
Precisa de um plano de fornecimento estável? Envie sua lista de modelos, quantidades e destino. Confirmaremos o prazo de entrega, o método de envio e os documentos de conformidade antes de você fazer o pedido.
Características e vantagens
✅ 🔋 Grade-A Cells, OEM-Equivalent Capacity
Each cell is graded at ≥ 6500mAh actual measured capacity — not rated. We reject any cell testing below 98% of nominal before assembly. Your end customers get the same runtime as a new device.
✅ 🛡️ Three-Layer Protection Circuit (PCM)
The built-in PCM guards against overcharge (> 4.25V cutoff), over-discharge (< 2.75V cutoff), and short circuit. This is non-negotiable for repair shop liability and end-user safety.
✅ 📋 CE & FCC Certified — Customs-Ready
All units ship with current CE (EU) and FCC (US) declarations of conformity. Supports smooth customs clearance into North America and Europe — critical for volume importers.
✅ 🔌 Plug-and-Play Connector
ZIF connector pitch and cable length match the OEM spec exactly. No re-pinning, no adapter needed. Tested fit on iPad 2 Wi-Fi, GSM, and CDMA variants.
✅ 📦 B2B Ready: Low MOQ, Mixed Orders Accepted
Minimum order is 50 pcs. Mixed orders (combining with other tablet battery SKUs from our catalog) count toward the same threshold. Custom labeling and retail-ready packaging available from 200 pcs.
✅ 🔧 Full Tool Kit Included
Every unit ships with a plastic spudger, Phillips #00 driver, and adhesive strips. Repair shops can move directly to installation — no sourcing separate tooling.
Embalagem e entrega
Prazo de entrega e envio
Produtos em estoque: Envio em até 3 dias
Para modelos de substituição padrão com estoque disponível.Encomendas de produção em massa: Envio em até 7 dias.
Para modelos regulares, de acordo com as especificações e requisitos de embalagem confirmados.Encomendas personalizadas: Envio em até 15 dias.
Para configuração personalizada de células, tamanho, fios/conectores, PCB/BMS, etiquetagem ou embalagem.
Observação: O tempo final de despacho depende de quantidade total, complexidade do modelo, requisitos de embalagem e documentos de conformidade de envio. Confirmaremos a data estimada de envio (ETD) após a confirmação do pedido.
Frete aéreo (urgente, volume menor)
Frete marítimo (custo-benefício para grandes volumes)
Ferrovia / Rodovia (dependendo do destino)
Canais expressos
Documentos disponíveis: UN38.3 / FISPQ / Relatório de Teste de Transporte (se aplicável)
A embalagem e a rotulagem das caixas de acordo com as normas podem ser providenciadas com base no método de envio escolhido.
EXW / FOB / CIF / DDP disponíveis
Solução completa para todas as necessidades do ecossistema Apple em um só lugar.
- Otimize sua cadeia de suprimentos. Consolide seus pedidos de baterias para MacBook, iPad, iPhone e Watch em um único envio para reduzir custos logísticos e maximizar suas margens de lucro no atacado.
Perguntas frequentes
Q1: Which exact iPad 2 models is this battery compatible with?
A: This battery fits all iPad 2 variants: A1395 (Wi-Fi), A1396 (GSM 3G), and A1397 (CDMA 3G). The OEM part numbers it replaces are A1376, 616-0559, 616-0561, and 616-0576. It does not fit iPad Air, iPad 3, or iPad 4 — different form factor and connector.
Q2: How long will the replaced battery last on a full charge?
Under real-world conditions, a healthy iPad 2 battery delivers roughly 9–11 hours of mixed use — Wi-Fi browsing, video playback, or music. A worn original battery drops well below that. A new replacement restores runtime to near-new levels.
Q3: Does this battery need to be activated or calibrated after installation?
A: No activation is required. For best initial accuracy of the battery percentage indicator, run 2–3 full charge/discharge cycles after installation. Charge to 100%, discharge to around 5%, then recharge fully. This calibrates the fuel gauge IC, not the cell itself.
Q4: What is the minimum order quantity (MOQ) and can I mix with other models?
A: MOQ is 50 pcs. Mixed orders across different tablet battery SKUs in our catalog count toward the same 50-pc threshold. This is designed for repair shops and distributors running multiple product lines simultaneously.
Q5: What certifications does this battery carry, and are documents available?
A: Each batch carries CE (EU LVD/EMC), FCC (US), and UN38.3 (air transport). MSDS/SDS documentation is available on request. These are required for legal import into the US, EU, and most other regulated markets.
Q6: What is the warranty and return policy for bulk orders?
A: All units carry a 12-month warranty from shipment date. DOA rate is guaranteed below 0.3%. For bulk orders, we accept returns or replacements for any confirmed defective units within the warranty period. Pre-shipment, we offer free samples (buyer pays shipping) so you can verify fit and performance before committing to volume.
Produtos relacionados
