Bateria AP16L5J 7.7V 36Wh para Acer Swift 5 SF514 / Spin 1 SP111 / TravelMate X5 TMX514 — Fornecimento por atacado para Ultrabooks e 2 em 1

Q1: Does AP16L5J fit the Switch 3 SW312-31 and TravelMate X5 TMX514 — most listings only show Swift 5 and Spin 1?
A1: Yes, confirmed across multiple independent sources. The Switch 3 SW312-31 and SW312-31P and the TravelMate X5 TMX514-51 / TMX514-51T / X514-51 / X514-51T all use the same 2ICP4/91/91 cell configuration as the Swift 5 SF514 and Spin 1 SP111 series. The omission of Switch 3 and TravelMate X5 from most distributor listings is a documentation gap, not a compatibility gap. Before ordering for SW312 or TMX514 units, check the original battery label — if it shows AP16L5J or 2ICP4/91/91, the fit is confirmed. We can verify compatibility by original P/N or device serial number if needed.

Q2: What is the difference between AP16L5J and AP16L8J — are they the same battery?
A2: They share the same 2ICP4/91/91 cell code, 7.7V nominal voltage, and 36Wh capacity, and multiple Amazon and distributor listings cross-reference both P/Ns as compatible. The distinction is that AP16L5J is the primary OEM reference on Acer’s parts database, while AP16L8J appears as a regional or variant P/N on some later production runs of the same platforms. Physical fitment and BMS handshake are identical. For procurement documents, use AP16L5J as the primary P/N and note AP16L8J as an accepted equivalent.

Q3: Some sources list this battery as 7.4V / 32Wh, others as 7.7V / 36Wh — which is correct for ordering?
A3: Both figures appear across credible sources, including major distributors. The 7.4V / 32Wh designation reflects nominal cell voltage reporting; 7.7V / 36Wh reflects the typical operating voltage used by the majority of verified sources including the OEM sparepartworld.com listing. The actual cell chemistry is the same regardless of which figure is cited. For procurement documents specifying voltage, 7.7V / 36Wh matches the OEM parts database and is the recommended reference. The BMS on all AP16L5J-compatible platforms accepts both designations without triggering a mismatch error.

Q4: Will AP16L5J trigger a “connected, not charging” error on Swift 5 or TravelMate X5 TMX514 after installation?
A4: This error on ultrabook-class platforms is almost always caused by one of three conditions: incomplete connector seating (the flat-pack connector requires firm positive engagement), BMS initialization state from a prior unit cached in firmware, or a voltage mismatch from an incorrect replacement. If the correct P/N is installed and fully seated, cycle the battery — discharge to 5%, charge to 100% without interruption, repeat once. On TravelMate X5 TMX514 units with Intel Core i7 and Intel Rapid Charge firmware, a BIOS reset may be needed to clear cached battery state data from the previous unit. If the error persists after two cycles, confirm the original battery label P/N matches AP16L5J or 2ICP4/91/91.

Q5: Can I order AP16L5J alongside Acer Chromebook Spin 311 CP311 batteries in the same shipment?
A5: The AP16L5J itself is confirmed compatible with the Chromebook Spin 311 CP311-2H and CP311-3H series, so in many cases a single P/N order covers both Windows ultrabook and ChromeOS devices. For Acer Chromebook Spin 311 CP311-2H battery bulk orders that span both Chrome and Windows platforms from the same depot or repair center, this eliminates the need for a separate Chromebook battery SKU from the 2017–2019 Acer range. Mixed-SKU orders combining AP16L5J with other Acer P/Ns (AC14B18J, AP16M4J, AP19B8K) are accepted from 10 units per individual SKU.

Q6: How should AP16L5J flat-pack batteries be stored and handled in a repair shop environment?
A6: Flat-pack Li-Polymer cells are more pressure-sensitive than cylindrical Li-ion cells — do not stack uncased units or place heavy items on stored batteries. Store at 15–25°C in a dry environment at 40–60% state of charge. The rigid anti-static enclosures in our packaging are designed to remain in place until installation. For repair shops with irregular Swift 5 or Spin 1 service volumes, avoid holding stock beyond 9 months without a conditioning cycle: discharge to 5%, charge to 95%, and verify the OS reports capacity within 5% of rated before deploying into a customer unit.