LR4867102-3S 65.84Wh 13.2V Replacement Battery for AOKZOE A1 PRO / A1L / A2 / A1 Handheld Gaming PC
-
🔋 13.2V / 65.84Wh — OEM-matched spec for AOKZOE A1 series; P/N: LR4867102-3S
-
🎮 Verified compatibility: AOKZOE A1 PRO, A1L, A2, A1 (all 13.2V variants)
-
⚡ 8-pin flex cable connector — direct board-level replacement, no wiring modification
-
🛡️ Multi-layer protection PCB: over-charge, over-discharge, over-current, thermal cutoff
-
🏭 Factory direct supply — grade A Li-ion cells, consistent batch spec, low MOQ entry
-
📦 OEM labeling and custom packaging supported for repair distributors and service chains
Descrição do produto
The AOKZOE A1 series — covering the A1, A1L, A1 PRO, and A2 — all run on the same internal battery platform. AOKZOE designed these devices as premium Windows handheld PCs targeting the high-performance segment, and the 65Wh battery pack reflects that: it is one of the larger internal cells in the compact handheld category, sitting above most mid-range competitors. The OEM part number LR4867102-3S is consistent across the full A1 lineup, which means a single SKU covers all four devices.
In practice, the 13.2V pack is a Li-ion multi-cell configuration with an 8-pin flex cable connector for board communication — this is not a simple JST plug-in cell like the retro handheld category. The connector carries both power and BMS data lines, so the replacement must match the original pin-out to avoid charging errors or capacity reporting issues. This unit does.
Verified Compatible Models & OEM Part Numbers:
| Dispositivo | OEM Battery P/N | Capacidade nominal | Tensão |
|---|---|---|---|
| AOKZOE A1 PRO | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1L | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A2 | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1 | LR4867102-3S | 65.84Wh | 13.2V |
⚠️ Connector verification required before ordering. The LR4867102-3S uses an 8-pin flex cable. Confirm your original battery’s connector type and pin layout matches before purchasing — particularly for units that may have received factory hardware revisions.
Parâmetros técnicos
| Parâmetro | Especificação |
|---|---|
| OEM Part Number (P/N) | LR4867102-3S |
| Tensão Nominal | 11,55V |
| Fully Charged Voltage | 13.2V (4.4V × 3 cells) |
| Capacidade nominal | 5700mAh / 65.84Wh |
| Química Celular | Lithium-Ion (Li-ion) |
| Grau celular | Grade A, ≤3% capacity variance |
| Configuração da célula | 3S (3 cells in series) |
| Tipo de conector | 8-pin flex cable (OEM-matched pinout) |
| Circuito de proteção | Over-charge / Over-discharge / Short-circuit / NTC thermal |
| Physical Dimensions | 105.80 × 76.30 × 14.00mm |
| Peso líquido | ~263g |
| Temperatura de operação | 0°C – 45°C (charging); −20°C – 60°C (storage) |
| Cycle Life (rated) | ≥500 cycles to 80% capacity |
| Dispositivos compatíveis | AOKZOE A1 PRO / A1L / A2 / A1 |
| Certificações | CE / RoHS / UN38.3 |
| Garantia | 12 meses a partir da data de envio |
Precisa de um plano de fornecimento estável? Envie sua lista de modelos, quantidades e destino. Confirmaremos o prazo de entrega, o método de envio e os documentos de conformidade antes de você fazer o pedido.
Características e vantagens
⚡ Full 65.84Wh Capacity — OEM Spec, Not a Downgrade
Rated at 65.84Wh to match the factory-installed pack in the AOKZOE A1 PRO and A1L. At typical TDP levels of 15–25W on Ryzen 7 7840U hardware, this translates to roughly 2–3 hours of gaming load per charge — identical to factory runtime expectations, not a degraded aftermarket substitute.
🔌 8-Pin Flex Cable Connector — Board-Level Compatible
The A1 series uses an 8-pin flex cable for battery-to-board communication, carrying both power rails and BMS data. This replacement ships with the correct connector pinout, ensuring the device firmware reads charge state, capacity, and health data accurately from day one. No pin remapping, no calibration workaround required.
🛡️ Integrated Multi-Layer Protection Circuit
Over-charge cutoff at 13.2V (4.4V per cell), over-discharge lockout, short-circuit protection, and NTC-based thermal monitoring. The protection circuit is designed to work alongside the host device’s own BMS firmware — not to conflict with it.
🏭 One P/N Covers Four Device Models
AOKZOE standardized the LR4867102-3S across the A1, A1L, A1 PRO, and A2. For repair shops and service centers carrying AOKZOE units, stocking this single SKU covers the brand’s entire first-generation handheld lineup. Lower inventory complexity, broader repair coverage.
📦 Repair Shop & Distributor Supply
Sourced from consistent production batches with <3% capacity variance cell-to-cell. Small batch entry orders accepted — no commitment to high opening MOQ. Tiered pricing opens as volume scales. Custom OEM packaging available for resellers building their own repair parts brand.
Embalagem e entrega
Prazo de entrega e envio
Produtos em estoque: Envio em até 3 dias
Para modelos de substituição padrão com estoque disponível.Encomendas de produção em massa: Envio em até 7 dias.
Para modelos regulares, de acordo com as especificações e requisitos de embalagem confirmados.Encomendas personalizadas: Envio em até 15 dias.
Para configuração personalizada de células, tamanho, fios/conectores, PCB/BMS, etiquetagem ou embalagem.
Observação: O tempo final de despacho depende de quantidade total, complexidade do modelo, requisitos de embalagem e documentos de conformidade de envio. Confirmaremos a data estimada de envio (ETD) após a confirmação do pedido.
Frete aéreo (urgente, volume menor)
Frete marítimo (custo-benefício para grandes volumes)
Ferrovia / Rodovia (dependendo do destino)
Canais expressos
Documentos disponíveis: UN38.3 / FISPQ / Relatório de Teste de Transporte (se aplicável)
A embalagem e a rotulagem das caixas de acordo com as normas podem ser providenciadas com base no método de envio escolhido.
EXW / FOB / CIF / DDP disponíveis
Perguntas frequentes
Q1: Is the LR4867102-3S battery compatible with all AOKZOE A1 series models?
A: Yes. AOKZOE used the LR4867102-3S across the A1, A1L, A1 PRO, and A2 — all four share the same 65.84Wh / 13.2V internal battery spec and 8-pin flex cable connector. Before ordering, confirm your original battery’s label shows LR4867102-3S and verify the connector type matches. Units with factory hardware revisions may have minor connector differences.
Q2: How long does the AOKZOE A1 Pro battery last, and when does it need replacing?
A: The A1 PRO ships with a 65Wh pack. At typical gaming TDP (15–25W on Ryzen 7 7840U), runtime ranges from roughly 2 to 3 hours per charge. Degradation below 80% capacity typically occurs after 500–700 cycles — around 18–24 months of daily use. Signs you need a replacement: runtime drops under 90 minutes, the device shuts off under gaming load before showing low battery, or the battery indicator becomes erratic.
Q3: Does the AOKZOE A1 Pro battery require activation or calibration after replacement?
A: No special activation sequence is required. After installation, fully charge the pack to 100% before first use — the device’s BMS will read the new cell’s capacity profile automatically. Some users report the battery percentage display recalibrating over the first 2–3 full charge cycles; this is normal and not a defect.
Q4: What connector type does the LR4867102-3S use, and is it a plug-in swap?
A: The LR4867102-3S uses an 8-pin flex cable connector for board-level communication. This is not a simple JST snap-in cell — the flex cable carries both power and BMS data lines. The replacement ships with the correct pinout matched to the A1 series board. Replacement requires opening the device chassis, disconnecting the original flex cable, and connecting the replacement. Technicians familiar with gaming handheld teardowns can complete this in 20–30 minutes.
Q5: What is the MOQ for wholesale or repair shop orders?
A: We accept small batch entry orders for repair shops and service centers — no high opening MOQ required. Volume pricing tiers unlock at higher quantities. Contact us for a current factory quote with lead time and pricing breakdown.
Q6: What lead time and shipping documentation applies for bulk orders?
A: Stocked SKUs ship within 3–5 business days. Custom or OEM-labeled orders run 10–15 business days depending on production schedule. We ship via DHL, FedEx, and sea freight. UN38.3 test reports and MSDS/SDS documentation are provided as standard for all lithium-ion battery shipments, covering air freight compliance and customs requirements.
Procurando mais modelos de consoles portáteis para jogos para distribuição? Navegue pela nossa seleção. Baterias para consoles de jogos portáteis no atacado Categoria para fornecimento em grande quantidade e preços de fábrica.
