holesale Steam Deck LCD F7A 40.04Wh OEM Replacement Battery ICP6 48 36 Factory Direct 1 holesale Steam Deck LCD F7A 40.04Wh OEM Replacement Battery ICP6 48 36 Factory Direct 2 holesale Steam Deck LCD F7A 40.04Wh OEM Replacement Battery ICP6 48 36 Factory Direct connector details holesale Steam Deck LCD F7A 40.04Wh OEM Replacement Battery ICP6 48 36 Factory Direct 3 holesale Steam Deck LCD F7A 40.04Wh OEM Replacement Battery ICP6 48 36 Factory Direct 4

F7A 40.04Wh 7.7V OEM Replacement Battery for Valve Steam Deck LCD — OEM Factory Direct

  • ✅ Exact OEM match: F7A / 2(ICP6/48/36+ICP6/57/80)-2, fits all Valve Steam Deck LCD units

  • ✅ True-rated 40.04Wh / 5313mAh — no inflated capacity figures

  • ✅ 4-cell Li-ion with multi-layer BMS: over-charge, over-discharge & short-circuit protection

  • ✅ 0-cycle cells shipped from factory; supports 45W USB-C PD fast charging protocol

  • ✅ B2B-ready: tiered wholesale pricing, flexible MOQ, OEM labeling available, ships direct from factory

Folgen Sie uns:

Produktbeschreibung

The Steam Deck LCD launched in 2022 with a fixed internal battery rated at 40Wh. After 500–600 cycles, capacity retention drops noticeably — this is the point where repair shops and refurbishment businesses need a reliable replacement source. Our F7A battery is built to the original Valve specification: 7.7V nominal, 40.04Wh, 4-cell polymer Li-ion configuration using the ICP6/48/36 + ICP6/57/80 cell pair.

Compatible Models / Original Part Numbers (P/N):

  • Batteriemodell: F7A

  • Cell P/N: ICP6/48/36 (cells 1–2) + ICP6/57/80 (cells 3–4)

  • Pack Code: 2(ICP6/48/36+ICP6/57/80)-2

  • Fits: Valve Steam Deck LCD (all 64GB / 256GB / 512GB SKUs) — LCD model only; not for Steam Deck OLED (which uses F7G/50Wh)

⚠️ Before ordering, confirm your unit is the LCD version. Open the back cover and verify the battery label reads F7A or ICP6/48/36.

Looking for the OLED version? Check out our Steam Deck OLED Replacement Battery (F7G 50Wh) — built to the same factory standard for the OLED model.

Technische Parameter

Parameter Spezifikation
Batteriemodell F7A
Cell Part Numbers ICP6/48/36 + ICP6/57/80 — 2(ICP6/48/36+ICP6/57/80)-2
Nennspannung 7.7V
Nennkapazität 5313mAh / 40.04Wh
Ladeabschaltspannung 8.4V
Zellkonfiguration 4-Cell Li-ion Polymer (2S2P)
Cycle Life (to 80% capacity) ≥ 500 full cycles
Innenwiderstand < 180mΩ (pack level)
Charging Protocol USB-C PD 45W compatible
Betriebstemperatur 0°C – 45°C (charge) / -20°C – 60°C (discharge)
Lagertemperatur -20°C – 35°C (recommended at 40–60% SOC)
BMS-Schutz Over-charge / Over-discharge / Short-circuit / Thermal
Compatible Device Valve Steam Deck LCD (64GB / 256GB / 512GB) — LCD only
Zustand Brand New, 0-Cycle
Zertifizierungen CE / RoHS
Garantie 12 Months from shipment date

Brauchen Sie einen zuverlässigen Versorgungsplan? Senden Sie uns Ihre Modellliste, die benötigten Mengen und den Lieferort. Wir bestätigen Ihnen Lieferzeit, Versandart und die erforderlichen Dokumente, bevor Sie die Bestellung aufgeben.

Merkmale und Vorteile

✅ True-Capacity Cells — No Label Inflation

Nominal capacity is 5313mAh / 40.04Wh at 7.7V. Every pack is discharge-tested on a BTS cycler before shipment. We publish the actual test data on request — something most resellers cannot provide.

✅ Drop-In Fit for Repair Technicians

Connector position, FPC cable length, and mounting-tab layout match the original Valve assembly exactly. No trimming, no adapter — typical swap time for an experienced tech is under 15 minutes.

✅ Multi-Stage BMS Protection

The integrated protection IC handles over-voltage cut-off at 8.4V, under-voltage lockout at 5.6V, short-circuit response within 200µs, and thermal shutdown above 70°C. This is the same protection architecture used in OEM packs.

✅ 45W USB-C PD Charging Compatible

Low internal resistance cells keep pack impedance below 180mΩ, so the Steam Deck’s 45W PD charging handshake functions without triggering thermal throttling — a known issue with poorly sourced aftermarket packs.

✅ Factory-Direct B2B Supply Chain

We manufacture and stock these in-house. No middlemen. Tiered pricing starts at modest quantities, with OEM private-label options available for repair chains and distributors needing branded packaging. Lead time for stock orders: 3–5 business days. Custom OEM runs: quoted individually.

✅ Consistent Batch Quality for Repair Shops

Each production batch carries a unique batch ID traceable back to raw cell inspection data. If a shop reports a field failure, we can pull the batch record within 24 hours. This matters when you’re turning over dozens of repairs per week.

Verpackung & Lieferung

Battery packing and warehouse stock ready for fast delivery and wholesale shipping orders

Lieferzeit & Versand

  • Lagerware: Versand innerhalb von 3 Tagen
    Für Standard-Ersatzmodelle mit verfügbarem Lagerbestand.

  • Bestellungen in Großserie: Versand innerhalb von 7 Tagen
    Für reguläre Modelle gemäß bestätigten Spezifikationen und Verpackungsanforderungen.

  • Kundenspezifische Bestellungen: Versand innerhalb von 15 Tagen
    Für kundenspezifische Zellkonfigurationen, Größen, Kabel/Steckverbinder, Leiterplatten/BMS, Etikettierung oder Verpackung.

Notiz: Die endgültige Versandzeit hängt ab von Gesamtmenge, Modellkomplexität, Verpackungsanforderungen und Versandkonformitätsdokumente. Wir werden Ihnen das voraussichtliche Versanddatum bestätigen (ETD) nach Auftragsbestätigung.

Verfügbare Versandarten:
  • Luftfracht (dringend, kleineres Volumen)

  • Seefracht (kostengünstig für Massengut)

  • Schiene / LKW (abhängig vom Bestimmungsort)

  • Expresskanäle

  • Verfügbare Dokumente: UN38.3 / Sicherheitsdatenblatt / Transportprüfbericht (falls zutreffend)

  • Die normgerechte Verpackung und Kartonetikettierung kann je nach gewählter Versandart arrangiert werden.

EXW / FOB / CIF / DDP verfügbar

Packaging and shipping process for lithium replacement batteries: anti-static bag with foam protection, carton sealing, pallet wrapping, and air/sea/ground transport

Häufig gestellte Fragen

Q1: Is this F7A battery compatible with the Steam Deck OLED model?
A: No. This F7A pack — cell code 2(ICP6/48/36+ICP6/57/80)-2 — is designed exclusively for the Steam Deck LCD. The OLED model uses a different battery (F7G, 50Wh, higher energy density). Installing the wrong pack can cause a connector mismatch or firmware non-recognition. Always verify the battery label inside your unit before ordering.

Q2: Does the new battery need to be activated or conditioned before first use?
A: The pack ships with a partial charge (around 40–50% SOC) for transport safety. For optimal capacity from the start, perform 3–4 full charge/discharge cycles: charge to 100%, then discharge to around 10–15% (not 0%), and repeat. This seats the electrolyte evenly across all four cells and brings the BMS calibration in line with the Deck’s fuel gauge.

Q3: Will this battery work with the Steam Deck’s 45W USB-C PD fast charging?
A: Yes. The pack’s internal resistance is kept below 180mΩ at pack level, which is within the thermal budget required for the Deck’s 45W PD handshake. Packs with high internal resistance (a common issue with cheap aftermarket cells) cause the system to throttle charge rate or display temperature warnings — this one does not.

Q4: What is the MOQ for wholesale or OEM orders?
A: Stock orders (standard F7A, no custom branding) can start at small quantities to suit repair shops testing a new supplier. For OEM private-label orders — custom packaging, logo, or batch documentation — MOQ and lead times are quoted per project. Contact us directly for a tiered pricing sheet.

Q5: What is the lead time and how are bulk orders shipped?
A: Standard stock orders typically ship within 3–5 business days. Battery packs are classified as UN 38.3-tested lithium-ion goods and are shipped in compliance with IATA Section II or IATA PI 965/966 depending on quantity and destination. We handle customs documentation and can arrange DHL, FedEx, or sea freight depending on volume.

Q6: What warranty and after-sales support do you provide for B2B buyers?
A: All units carry a 12-month warranty from the shipment date. If a field failure occurs — dead on arrival, abnormal self-discharge, swelling — we replace the defective units in the next shipment at no charge after a simple fault report. Each production batch is traceable by batch ID, so if you report a pattern failure we can isolate the root cause within 24 hours.

Suchen Sie weitere Handheld-Gaming-Modelle für den Vertrieb? Stöbern Sie in unserem Angebot. Großhandel Kategorie für Großbestellungen und Fabrikpreise.

Verwandte Produkte

Zum Seitenanfang scrollen
Nehmen Sie Kontakt auf
Bei Fragen oder für Unterstützung:

Telefon/WhatsApp/WeChat: +86 13712040916

WhHan, China

3. Etage, Gebäude 1, Phase III, Internationales Unternehmenszentrum, Guanggu Avenue, East Lake New Tech Zone, Wuhan, Provinz Hubei, China