iPad 2 Replacement Battery A1376 616-0561 | 3.8V 6500mAh Li-ion for A1395 A1396 A1397 A1316
-
✅ Fits iPad 2 Wi-Fi / 3G — models A1395, A1396, A1397; P/N A1376, 616-0559, 616-0561, 616-0576
-
✅ Rated 3.8V / 6500mAh / 25Wh — matches OEM spec precisely
-
✅ Grade-A LiCoO₂ cells with triple-layer protection circuit (overcharge / over-discharge / short circuit)
-
✅ CE, FCC certified; every unit 100% capacity-tested before shipment
-
✅ Factory direct — competitive tiered pricing from MOQ 50 pcs; mixed models accepted
-
✅ Includes full installation tool kit; ready for repair shop or refurbishment line use
Produktbeschreibung
The iPad 2 (2011–2014) remains widely deployed across school systems, enterprise kiosk setups, and consumer refurbishment channels worldwide. The original battery — part number A1376, Apple internal code 616-0561 — degrades to below 80% capacity after roughly 500–600 real-world charge cycles, which for moderate daily users means 2–3 years of service life. At that point, replacing the battery is far more economical than swapping the unit.
This cell is rated at 3.8V nominal with a capacity of 6500mAh / 25Wh, using a Li-ion chemistry, consistent with original Apple specifications. Our factory produces to identical dimensional and electrical tolerances, ensuring the connector drops straight onto the iPad 2 logic board without modification.
Verified Compatible Models / Original Part Numbers:
| Device Variant | Apple Model ID | OEM P/N |
|---|---|---|
| iPad 2 Wi-Fi | A1395 | A1376 |
| iPad 2 Wi-Fi + 3G (GSM) | A1396 | 616-0559 |
| iPad 2 Wi-Fi + 3G (CDMA) | A1397 | 616-0561 |
| iPad 2 (1st revision PCB) | A1316 | 616-0576 |
⚠️ Not compatible with iPad Air, iPad 3, or iPad 4. Always verify the model number printed on the back housing before ordering.
Technische Parameter
| Parameter | Spezifikation |
|---|---|
| Battery Model / P/N | A1376 / 616-0559 / 616-0561 / 616-0576 |
| Nennspannung | 3,8 V |
| Kapazität | 6500mAh / 25Wh |
| Zellchemie | LiCoO₂ (Lithium-Cobalt-Oxid) |
| Zelltyp | Li-ion Polymer (soft-pack) |
| Charge Voltage (Max) | 4.20V ± 0.05V |
| Discharge Cut-off | 2,75 V |
| Lebenszyklus | ≥ 600 cycles @ 80% DOD |
| Betriebstemperatur | 0°C ~ 45°C (charge) / -20°C ~ 60°C (discharge) |
| Abmessungen | 195mm × 119mm × 2.5mm |
| Gewicht | Approx. 270g |
| Anschlusstyp | ZIF, OEM-compatible |
| Schutzschaltung | PCM (overcharge / over-discharge / short circuit) |
| Zertifizierungen | CE, FCC, UN38.3, MSDS / SDS available |
| Garantie | 12 months from shipment date |
| Mindestbestellmenge | 50 pcs (mixed order accepted > 50 pcs) |
| Lead Time (Stock) | 3–5 business days |
| Verpackung | Anti-static bag + foam box; custom retail packaging available |
Brauchen Sie einen zuverlässigen Versorgungsplan? Senden Sie uns Ihre Modellliste, die benötigten Mengen und den Lieferort. Wir bestätigen Ihnen Lieferzeit, Versandart und die erforderlichen Dokumente, bevor Sie die Bestellung aufgeben.
Merkmale und Vorteile
✅ 🔋 Grade-A Cells, OEM-Equivalent Capacity
Each cell is graded at ≥ 6500mAh actual measured capacity — not rated. We reject any cell testing below 98% of nominal before assembly. Your end customers get the same runtime as a new device.
✅ 🛡️ Three-Layer Protection Circuit (PCM)
The built-in PCM guards against overcharge (> 4.25V cutoff), over-discharge (< 2.75V cutoff), and short circuit. This is non-negotiable for repair shop liability and end-user safety.
✅ 📋 CE & FCC Certified — Customs-Ready
All units ship with current CE (EU) and FCC (US) declarations of conformity. Supports smooth customs clearance into North America and Europe — critical for volume importers.
✅ 🔌 Plug-and-Play Connector
ZIF connector pitch and cable length match the OEM spec exactly. No re-pinning, no adapter needed. Tested fit on iPad 2 Wi-Fi, GSM, and CDMA variants.
✅ 📦 B2B Ready: Low MOQ, Mixed Orders Accepted
Minimum order is 50 pcs. Mixed orders (combining with other tablet battery SKUs from our catalog) count toward the same threshold. Custom labeling and retail-ready packaging available from 200 pcs.
✅ 🔧 Full Tool Kit Included
Every unit ships with a plastic spudger, Phillips #00 driver, and adhesive strips. Repair shops can move directly to installation — no sourcing separate tooling.
Verpackung & Lieferung
Lieferzeit & Versand
Lagerware: Versand innerhalb von 3 Tagen
Für Standard-Ersatzmodelle mit verfügbarem Lagerbestand.Bestellungen in Großserie: Versand innerhalb von 7 Tagen
Für reguläre Modelle gemäß bestätigten Spezifikationen und Verpackungsanforderungen.Kundenspezifische Bestellungen: Versand innerhalb von 15 Tagen
Für kundenspezifische Zellkonfigurationen, Größen, Kabel/Steckverbinder, Leiterplatten/BMS, Etikettierung oder Verpackung.
Notiz: Die endgültige Versandzeit hängt ab von Gesamtmenge, Modellkomplexität, Verpackungsanforderungen und Versandkonformitätsdokumente. Wir werden Ihnen das voraussichtliche Versanddatum bestätigen (ETD) nach Auftragsbestätigung.
Luftfracht (dringend, kleineres Volumen)
Seefracht (kostengünstig für Massengut)
Schiene / LKW (abhängig vom Bestimmungsort)
Expresskanäle
Verfügbare Dokumente: UN38.3 / Sicherheitsdatenblatt / Transportprüfbericht (falls zutreffend)
Die normgerechte Verpackung und Kartonetikettierung kann je nach gewählter Versandart arrangiert werden.
EXW / FOB / CIF / DDP verfügbar
Beschaffung aus einer Hand für das gesamte Apple-Ökosystem
Optimieren Sie Ihre Lieferkette. Fassen Sie Ihre Bestellungen für MacBook-, iPad-, iPhone- und Apple Watch-Batterien in einer einzigen Sendung zusammen, um die Logistikkosten zu senken und Ihre Großhandelsmargen zu maximieren.
Häufig gestellte Fragen
Q1: Which exact iPad 2 models is this battery compatible with?
A: This battery fits all iPad 2 variants: A1395 (Wi-Fi), A1396 (GSM 3G), and A1397 (CDMA 3G). The OEM part numbers it replaces are A1376, 616-0559, 616-0561, and 616-0576. It does not fit iPad Air, iPad 3, or iPad 4 — different form factor and connector.
Q2: How long will the replaced battery last on a full charge?
Under real-world conditions, a healthy iPad 2 battery delivers roughly 9–11 hours of mixed use — Wi-Fi browsing, video playback, or music. A worn original battery drops well below that. A new replacement restores runtime to near-new levels.
Q3: Does this battery need to be activated or calibrated after installation?
A: No activation is required. For best initial accuracy of the battery percentage indicator, run 2–3 full charge/discharge cycles after installation. Charge to 100%, discharge to around 5%, then recharge fully. This calibrates the fuel gauge IC, not the cell itself.
Q4: What is the minimum order quantity (MOQ) and can I mix with other models?
A: MOQ is 50 pcs. Mixed orders across different tablet battery SKUs in our catalog count toward the same 50-pc threshold. This is designed for repair shops and distributors running multiple product lines simultaneously.
Q5: What certifications does this battery carry, and are documents available?
A: Each batch carries CE (EU LVD/EMC), FCC (US), and UN38.3 (air transport). MSDS/SDS documentation is available on request. These are required for legal import into the US, EU, and most other regulated markets.
Q6: What is the warranty and return policy for bulk orders?
A: All units carry a 12-month warranty from shipment date. DOA rate is guaranteed below 0.3%. For bulk orders, we accept returns or replacements for any confirmed defective units within the warranty period. Pre-shipment, we offer free samples (buyer pays shipping) so you can verify fit and performance before committing to volume.
