LR4867102-3S 65.84Wh 13.2V Replacement Battery for AOKZOE A1 PRO / A1L / A2 / A1 Handheld Gaming PC
-
🔋 13.2V / 65.84Wh — OEM-matched spec for AOKZOE A1 series; P/N: LR4867102-3S
-
🎮 Verified compatibility: AOKZOE A1 PRO, A1L, A2, A1 (all 13.2V variants)
-
⚡ 8-pin flex cable connector — direct board-level replacement, no wiring modification
-
🛡️ Multi-layer protection PCB: over-charge, over-discharge, over-current, thermal cutoff
-
🏭 Factory direct supply — grade A Li-ion cells, consistent batch spec, low MOQ entry
-
📦 OEM labeling and custom packaging supported for repair distributors and service chains
Produktbeschreibung
The AOKZOE A1 series — covering the A1, A1L, A1 PRO, and A2 — all run on the same internal battery platform. AOKZOE designed these devices as premium Windows handheld PCs targeting the high-performance segment, and the 65Wh battery pack reflects that: it is one of the larger internal cells in the compact handheld category, sitting above most mid-range competitors. The OEM part number LR4867102-3S is consistent across the full A1 lineup, which means a single SKU covers all four devices.
In practice, the 13.2V pack is a Li-ion multi-cell configuration with an 8-pin flex cable connector for board communication — this is not a simple JST plug-in cell like the retro handheld category. The connector carries both power and BMS data lines, so the replacement must match the original pin-out to avoid charging errors or capacity reporting issues. This unit does.
Verified Compatible Models & OEM Part Numbers:
| Gerät | OEM-Batterie Teilenummer | Nennkapazität | Stromspannung |
|---|---|---|---|
| AOKZOE A1 PRO | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1L | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A2 | LR4867102-3S | 65.84Wh | 13.2V |
| AOKZOE A1 | LR4867102-3S | 65.84Wh | 13.2V |
⚠️ Connector verification required before ordering. The LR4867102-3S uses an 8-pin flex cable. Confirm your original battery’s connector type and pin layout matches before purchasing — particularly for units that may have received factory hardware revisions.
Technische Parameter
| Parameter | Spezifikation |
|---|---|
| OEM Part Number (P/N) | LR4867102-3S |
| Nennspannung | 11,55 V |
| Fully Charged Voltage | 13.2V (4.4V × 3 cells) |
| Nennkapazität | 5700mAh / 65.84Wh |
| Zellchemie | Lithium-Ion (Li-ion) |
| Zellqualität | Grade A, ≤3% capacity variance |
| Zellkonfiguration | 3S (3 cells in series) |
| Anschlusstyp | 8-pin flex cable (OEM-matched pinout) |
| Schutzschaltung | Over-charge / Over-discharge / Short-circuit / NTC thermal |
| Physical Dimensions | 105.80 × 76.30 × 14.00mm |
| Nettogewicht | ~263g |
| Betriebstemperatur | 0°C – 45°C (charging); −20°C – 60°C (storage) |
| Cycle Life (rated) | ≥500 cycles to 80% capacity |
| Kompatible Geräte | AOKZOE A1 PRO / A1L / A2 / A1 |
| Zertifizierungen | CE / RoHS / UN38.3 |
| Garantie | 12 Monate ab Versanddatum |
Brauchen Sie einen zuverlässigen Versorgungsplan? Senden Sie uns Ihre Modellliste, die benötigten Mengen und den Lieferort. Wir bestätigen Ihnen Lieferzeit, Versandart und die erforderlichen Dokumente, bevor Sie die Bestellung aufgeben.
Merkmale und Vorteile
⚡ Full 65.84Wh Capacity — OEM Spec, Not a Downgrade
Rated at 65.84Wh to match the factory-installed pack in the AOKZOE A1 PRO and A1L. At typical TDP levels of 15–25W on Ryzen 7 7840U hardware, this translates to roughly 2–3 hours of gaming load per charge — identical to factory runtime expectations, not a degraded aftermarket substitute.
🔌 8-Pin Flex Cable Connector — Board-Level Compatible
The A1 series uses an 8-pin flex cable for battery-to-board communication, carrying both power rails and BMS data. This replacement ships with the correct connector pinout, ensuring the device firmware reads charge state, capacity, and health data accurately from day one. No pin remapping, no calibration workaround required.
🛡️ Integrated Multi-Layer Protection Circuit
Over-charge cutoff at 13.2V (4.4V per cell), over-discharge lockout, short-circuit protection, and NTC-based thermal monitoring. The protection circuit is designed to work alongside the host device’s own BMS firmware — not to conflict with it.
🏭 One P/N Covers Four Device Models
AOKZOE standardized the LR4867102-3S across the A1, A1L, A1 PRO, and A2. For repair shops and service centers carrying AOKZOE units, stocking this single SKU covers the brand’s entire first-generation handheld lineup. Lower inventory complexity, broader repair coverage.
📦 Repair Shop & Distributor Supply
Sourced from consistent production batches with <3% capacity variance cell-to-cell. Small batch entry orders accepted — no commitment to high opening MOQ. Tiered pricing opens as volume scales. Custom OEM packaging available for resellers building their own repair parts brand.
Verpackung & Lieferung
Lieferzeit & Versand
Lagerware: Versand innerhalb von 3 Tagen
Für Standard-Ersatzmodelle mit verfügbarem Lagerbestand.Bestellungen in Großserie: Versand innerhalb von 7 Tagen
Für reguläre Modelle gemäß bestätigten Spezifikationen und Verpackungsanforderungen.Kundenspezifische Bestellungen: Versand innerhalb von 15 Tagen
Für kundenspezifische Zellkonfigurationen, Größen, Kabel/Steckverbinder, Leiterplatten/BMS, Etikettierung oder Verpackung.
Notiz: Die endgültige Versandzeit hängt ab von Gesamtmenge, Modellkomplexität, Verpackungsanforderungen und Versandkonformitätsdokumente. Wir werden Ihnen das voraussichtliche Versanddatum bestätigen (ETD) nach Auftragsbestätigung.
Luftfracht (dringend, kleineres Volumen)
Seefracht (kostengünstig für Massengut)
Schiene / LKW (abhängig vom Bestimmungsort)
Expresskanäle
Verfügbare Dokumente: UN38.3 / Sicherheitsdatenblatt / Transportprüfbericht (falls zutreffend)
Die normgerechte Verpackung und Kartonetikettierung kann je nach gewählter Versandart arrangiert werden.
EXW / FOB / CIF / DDP verfügbar
Häufig gestellte Fragen
Q1: Is the LR4867102-3S battery compatible with all AOKZOE A1 series models?
A: Yes. AOKZOE used the LR4867102-3S across the A1, A1L, A1 PRO, and A2 — all four share the same 65.84Wh / 13.2V internal battery spec and 8-pin flex cable connector. Before ordering, confirm your original battery’s label shows LR4867102-3S and verify the connector type matches. Units with factory hardware revisions may have minor connector differences.
Q2: How long does the AOKZOE A1 Pro battery last, and when does it need replacing?
A: The A1 PRO ships with a 65Wh pack. At typical gaming TDP (15–25W on Ryzen 7 7840U), runtime ranges from roughly 2 to 3 hours per charge. Degradation below 80% capacity typically occurs after 500–700 cycles — around 18–24 months of daily use. Signs you need a replacement: runtime drops under 90 minutes, the device shuts off under gaming load before showing low battery, or the battery indicator becomes erratic.
Q3: Does the AOKZOE A1 Pro battery require activation or calibration after replacement?
A: No special activation sequence is required. After installation, fully charge the pack to 100% before first use — the device’s BMS will read the new cell’s capacity profile automatically. Some users report the battery percentage display recalibrating over the first 2–3 full charge cycles; this is normal and not a defect.
Q4: What connector type does the LR4867102-3S use, and is it a plug-in swap?
A: The LR4867102-3S uses an 8-pin flex cable connector for board-level communication. This is not a simple JST snap-in cell — the flex cable carries both power and BMS data lines. The replacement ships with the correct pinout matched to the A1 series board. Replacement requires opening the device chassis, disconnecting the original flex cable, and connecting the replacement. Technicians familiar with gaming handheld teardowns can complete this in 20–30 minutes.
Q5: What is the MOQ for wholesale or repair shop orders?
A: We accept small batch entry orders for repair shops and service centers — no high opening MOQ required. Volume pricing tiers unlock at higher quantities. Contact us for a current factory quote with lead time and pricing breakdown.
Q6: What lead time and shipping documentation applies for bulk orders?
A: Stocked SKUs ship within 3–5 business days. Custom or OEM-labeled orders run 10–15 business days depending on production schedule. We ship via DHL, FedEx, and sea freight. UN38.3 test reports and MSDS/SDS documentation are provided as standard for all lithium-ion battery shipments, covering air freight compliance and customs requirements.
Suchen Sie weitere Handheld-Gaming-Modelle für den Vertrieb? Stöbern Sie in unserem Angebot. Großhandel Kategorie für Großbestellungen und Fabrikpreise.
