iPhone 13 Pro Max 4650mAh High Capacity Battery — A2653 / No Pop-Up / TI Chip Self-Diagnostic / Pure Cobalt Cell
-
🔋 4650mAh high-density Pure Cobalt cell — 6.7% above OEM spec (A2653 standard: 4352mAh)
-
✅ TI chip + self-diagnostic — reports 100% health & 0 cycles in iOS Settings; zero “Unknown Part” pop-up
-
📱 Compatible: A2484 (US) / A2641 (CA/JP) / A2643 (Global) / A2644 (CN) / A2645 (RU)
-
🏭 Factory direct — consistent batch quality, COA & UN38.3 available per order
-
📦 B2B bulk supply — mixed-model orders accepted, custom packaging available
Produktbeschreibung
The iPhone 13 Pro Max battery market is flooded with parts that either trigger the iOS “Unknown Part” warning or misrepresent actual capacity. This unit addresses both problems directly.
Built on a Texas Instruments chipset-compatible BMS architecture and pre-programmed for iOS self-diagnostic pairing, it reports 100% battery health and 0 charge cycles immediately after installation — no spot welding, no BMS swapping required. Capacity is rated at 4650mAh / 3.85V / 17.90Wh, measurably above the OEM A2653 spec.
Compatible device models (P/N):
A2484 (USA), A2641 (Canada / Japan / Mexico / Saudi Arabia), A2643 (International / Global), A2644 (China / Hong Kong), A2645 (Russia) — internal battery part number: A2653
Technische Parameter
| Parameter | Spezifikation |
|---|---|
| Compatible Device | iPhone 13 Pro Max (A2484 / A2641 / A2643 / A2644 / A2645) |
| Internal Battery P/N | A2653 |
| Nennkapazität | 4650mAh |
| Nennspannung | 3,85 V |
| Energie | 17.90Wh |
| Zelltyp | Pure Cobalt Cell (High Density) |
| BMS / Diagnostic Chip | TI-Compatible Fuel Gauge — Self-Diagnostic |
| iOS Health Display | 100% Health / 0 Cycles — No Unknown Part Warning |
| Ladespannung (Max.) | 4,35 V |
| Discharge Cutoff | 2,75 V |
| Thermal Cutoff | 60°C |
| Lebenszyklus | ≥ 500 cycles @ ≥ 80% capacity retention |
| Abmessungen | 68.0 × 90.0 × 5.0 mm (±0.3mm tolerance) |
| Zertifizierungen | CE / RoHS / UN38.3 |
| Documentation Available | COA / MSDS / UN38.3 Air Freight Report |
| Adhesive Gasket | Pre-applied waterproof adhesive included |
| OEM Comparison (A2653) | OEM Standard: 4352mAh — This unit: +6.7% capacity |
Brauchen Sie einen zuverlässigen Versorgungsplan? Senden Sie uns Ihre Modellliste, die benötigten Mengen und den Lieferort. Wir bestätigen Ihnen Lieferzeit, Versandart und die erforderlichen Dokumente, bevor Sie die Bestellung aufgeben.
Merkmale und Vorteile
✅ Zero “Unknown Part” Warning — iOS Fully Compliant
The embedded TI-compatible fuel gauge chip communicates directly with iOS. Post-install, Settings → General → About → Parts & Service History shows battery as verified. Repair shops using this part avoid callback complaints caused by persistent iOS warnings.
✅ 🔋 Honest 4650mAh Capacity, Verifiable by 3uTools
Capacity is readable via 3uTools or iMazing. Unlike inflated-spec parts that collapse under load testing, this cell sustains rated capacity across the first 50 cycles. Confirmed via batch-level discharge testing before shipment.
✅ 🛡️ Multi-Layer Protection Circuit (Over-charge / Over-discharge / Short-circuit / Thermal)
Four-layer protection built into the PCB. Cutoff voltage: 4.35V charge / 2.75V discharge. Thermal threshold triggers at 60°C — relevant for high-volume repair environments where install speed matters more than careful warmup.
✅ ⚡ Advanced Pure Cobalt Cell Chemistry — Higher Energy Density & Longevity
Our Pure Cobalt cells provide superior cycle life, thermal stability and consistent capacity retention compared to conventional Li-polymer cells. This technology improves safety and durability for demanding users.
✅ 📦 B2B Factory-Direct Supply Chain
Sourced directly from the cell production line — no middleman margin stacked in. Each shipment includes batch COA, and UN38.3 air-freight certification is available on request for international buyers. Consistent cell grade across reorders: no random “Grade A/B” lottery common with spot-market suppliers.
✅ 🔧 Drop-In Fit, Pre-Adhered Gasket
Flex connector footprint and battery outline match OEM dimensions within ±0.3mm tolerance. Waterproof adhesive gasket is pre-applied. No cutting, trimming, or adhesive sourcing required on the repair bench — reduces per-unit install time by approximately 3–4 minutes at scale.
✅ 📋 Certified & Documentation-Ready
CE / RoHS / UN38.3 certified. MSDS available. For buyers shipping via air freight in bulk, full hazmat documentation is provided in the order package — a practical requirement most competitors skip until you ask for it.
Verpackung & Lieferung
Lieferzeit & Versand
Lagerware: Versand innerhalb von 3 Tagen
Für Standard-Ersatzmodelle mit verfügbarem Lagerbestand.Bestellungen in Großserie: Versand innerhalb von 7 Tagen
Für reguläre Modelle gemäß bestätigten Spezifikationen und Verpackungsanforderungen.Kundenspezifische Bestellungen: Versand innerhalb von 15 Tagen
Für kundenspezifische Zellkonfigurationen, Größen, Kabel/Steckverbinder, Leiterplatten/BMS, Etikettierung oder Verpackung.
Notiz: Die endgültige Versandzeit hängt ab von Gesamtmenge, Modellkomplexität, Verpackungsanforderungen und Versandkonformitätsdokumente. Wir werden Ihnen das voraussichtliche Versanddatum bestätigen (ETD) nach Auftragsbestätigung.
Luftfracht (dringend, kleineres Volumen)
Seefracht (kostengünstig für Massengut)
Schiene / LKW (abhängig vom Bestimmungsort)
Expresskanäle
Verfügbare Dokumente: UN38.3 / Sicherheitsdatenblatt / Transportprüfbericht (falls zutreffend)
Die normgerechte Verpackung und Kartonetikettierung kann je nach gewählter Versandart arrangiert werden.
EXW / FOB / CIF / DDP verfügbar
Beschaffung aus einer Hand für das gesamte Apple-Ökosystem
Optimieren Sie Ihre Lieferkette. Fassen Sie Ihre Bestellungen für MacBook-, iPad-, iPhone- und Apple Watch-Batterien in einer einzigen Sendung zusammen, um die Logistikkosten zu senken und Ihre Großhandelsmargen zu maximieren.
Häufig gestellte Fragen
Q1: Does this battery trigger an “Unknown Part” warning on iOS 16, 17, or 18?
No. The TI-compatible fuel gauge chip is pre-programmed to pair with iOS diagnostics. After installation, navigate to Settings → General → About → Parts & Service History. The battery will show as verified. No BMS swapping or workaround apps needed. Confirmed compatible through iOS 18.x.
Q2: What is the actual verified capacity — is 4650mAh accurate?
Yes, verifiable via 3uTools or iMazing immediately after install. The cell sustains rated capacity through the first 50 cycles. This figure reflects discharge-test results at the batch level, not peak-condition lab numbers.
Q3: Which exact iPhone 13 Pro Max model numbers is this battery compatible with?
All five regional variants: A2484 (US), A2641 (Canada/Japan/Mexico/Saudi Arabia), A2643 (International/Global), A2644 (China/Hong Kong), A2645 (Russia). Internal battery part number replaced: A2653. Not compatible with iPhone 13 or iPhone 13 Pro.
Q4: How long does a replacement iPhone 13 Pro Max battery last before degrading below 80% capacity?
Under normal daily use (1 full cycle per day), this Pure Cobalt cell is rated for 500+ cycles at 80%+ capacity retention under standard IEC 61960 test conditions — roughly 18 to 24 months of typical use.
Q5: What is the MOQ for wholesale orders and what is the lead time?
We accept small batch trial orders for new B2B partners — contact us for current tiered pricing. Standard lead time for stocked SKUs is 1 to 3 business days. Air freight (UN38.3 certified) typically reaches major markets in 5 to 8 business days. Sea freight is available for high-volume orders.
Q6: What certifications and quality documentation are available for bulk orders?
Each batch ships with a Certificate of Analysis (COA), RoHS compliance declaration, and CE certificate. UN38.3 air freight test report is available on request. MSDS documentation is included in every commercial invoice package for customs clearance.
